Perfectpro Bathroom Radio, Black RB1 Data Sheet

 Scan sensitivity setting – FM 

The radio will normally scan all stations from FM broadcasts including the weaker 

signals. However, you may wish the Auto-scan to find only those stations with strong

enough signals to give good reception.

1.  Press the On/Off button to turn on the radio.

2.  Select the FM band by pressing the Source button.

3.  Press the Menu button, the display shows “Scan setting”.

4.  Press the Tuning knob.

5.  Rotate the Tuning knob to select between “All stations” or “Strong station” (default  

 

is All stations).

The “Strong station” option will allow the radio to find strong signals only when

 scanning.

6.  Press the Tuning knob to confirm your setting. The display will return to normal

 

radio display.

There are 20 memory presets in the radio, 10 for DAB and 10 for FM. Presets are 

remembered by the radio in the event of a power failure.

1.  Press the On/Off button to turn on the radio.

2.  Press the Source button to select the desired waveband.

3.  Tune to the required station.

4.  Press and hold the required Preset button until the radio beeps and shows for  

 

example “Preset 01 Saved”.

5.  Repeat step 3 and 4 for the remaining presets.

6.  Stations stored in the preset memories can be over-written by following the above  

 procedure.

1.  Press the On/Off button to turn on the radio.

2.  Press the Source button to select the desired waveband.

3.  Briefly Press the required Preset button, the display will show for example “Preset  

 

01 Loaded” for a few seconds and the radio frequency.

   

A 3.5mm stereo Aux In socket is provided on the side behind the rubber cover, for 

connecting an external audio device such as MP3 player or CD player (not included with 

this radio).  

1.  Connect an audio source to the Aux In socket.

2.  Press the Source button to select AUX input. Display will show “AUX IN”.

3.  Play the external player.

4.  Adjust the volume of both the radio and the player for comfortable listening.

5.  After use, close the rubber cover to prevent moist or dust from entering into the  

 

sockets and radio.

Notes: Never use the AUX-IN socket in rainy or moist conditions to prevent moist from 

entering the radio. Keep the rubber cover closed under these conditions.

The Auto-Power management function will be activated in AUX mode. If there is no 

signal from the AUX input jack for a period over 15 minutes, the unit will automatically 

switch to standby mode. The operation indicator and the LCD will go off in such case. 

Pressing the On/Standby button will wake up the unit.

The clock can only be set when the radio is in standby mode. If no buttons are pressed 

for 5 seconds, the radio will exit the clock setup and the setting is cancelled.

1.  Press and hold the Time Set knob for 12 seconds until the hour digits flash on the display.

2.  Rotate the Time Set knob to set the hour.

3.  Press the Time Set knob to confirm, the minute digits flash.

4.  Rotate the Time Set knob to set the minute.

5.  Press the Time Set knob to confirm, the day flashes on the display.

6.  Rotate the Time Set knob to set the current day.

7.  Press the Time Set knob to confirm, the month flashes.

8.  Rotate the Time Set knob to set the current month.

9.  Press the Time Set knob to confirm, the year will then flash on the display.

10.  Rotate the Time Set knob to set the current year.

11.  Press the Time Set knob to confirm, “SYNCLOCK ON” flashes.

12.  Rotary the Time Set knob to select “SYNCLOCK ON” or “SYNCLOCK OFF”.

13.  Press the Time Set knob to confirm and finish the clock setting.

If “SYNCLOCK ON” is selected, the symbol “   ” will show on the clock display. 

Some RDS stations transmit a time signal. If reception is good and you have 

selected the “SYNCLOCK ON” option during the time setting, the time will be 

automatically updated (“   ” flashes on the display). Time synchronisation can take

several minutes. The automatic time setting is always activated when the radio is 

switched from standby to FM broadcasting and receives a RDS station.

G B