Perfectpro Bathroom Radio, Black RB1 Data Sheet
Product codes
RB1
ATP PASSCODE
This radio is equipped with an Anti-Theft-Protection system (ATP system). When the
ATP system is enabled, a passcode is required for turning on the radio.
1. Press the
On/Off button to turn on the radio.
2. Press the
Menu button.
3. The display shows “System”.
4. Rotate the
Tuning knob until the display shows “Passcode”. Press the Tuning knob.
“Enable” or “Disable” will be displayed, to enable ATP, turn and press
Tuning knob
to select “Enable”.
5. “Change Passcode” will be displayed, enter a 4-digits numeric passcode by
pressing the preset buttons (1-10)
6. “Confirm Passcode” will be displayed. Enter a second time the same passcode to
re-confirm.
7. To disable passcode, select “Disable” as previously showed. And re-enter the
previous passcode to disable the lock.
When ATP is enabled, and if wrong passcode is entered for three times, a timer will be
activated. The next attempt will be possible only after the timer has elapsed. The timer
period will be increased with further wrong passcodes.
WARNING: If you choose to activate the passcode, please note your passcode
somewhere safe as a memory back-up in case you should forget it. This as there
is no way to reset the radio should the passcode be forgotten!
15
16
BACKLIGHT
LCD backlight configuration
1. Press the
Power On/Off button to turn on the radio.
2. Press the
Menu button, and then rotate the Tuning Control knob until the
display shows “System”.
3. Press the
Tuning Control knob; rotate the Tuning Control knob until the
display shows “LCD backlight”.
4. Press the
Tuning Control knob to enter the LCD backlight adjustment menu.
5. Rotate the
Tuning Control knob to select “on” in order to keep backlight
always lightened when the radio is turned on with AC power supply;
6. Or rotate the
Tuning Control knob to select “off” (by default) so that the
backlight will be lightened for about 10 seconds whenever a button is pressed
with AC power supply.
7. Press the
Tuning Control knob to confirm your choice.
Note: The LCD backlight option “on” is only functional when the radio is powered
by AC power supply. When the radio is powered by battery power supply, the
LCD backlight is switched to option “off” – 10 seconds lightened when a button is
pressed. When the radio is connected to mains AC power again, the last user
setting will be applied again.
TONE
The
Tone function enables the user to adjust the lower and higher sound frequencies.
1. Press the On/Off button to turn on the radio.
2. Press and hold the Volume knob for about 3 seconds, the display shows “BASS 0”.
3. Rotate the Volume knob to set the desire Bass level.
4. Press the Volume knob to confirm, the display shows “TREBLE 0”.
5. Rotate the Volume knob to set the desire Treble level.
6. Press the Volume knob to confirm and return to normal display.
G B
GB