Imperial Bathroom Radio, Black 22-210-00 Data Sheet

GB

• 

In this menu item you can reset the DABMAN 110 to its factory settings. This 

may be necessary if changes in the basic settings triggered an impairment of 

the functions of the DABMAN 110.

Important  note:  by  accessing  the  factory  settings,  all  individual  settings, 

such as preset station lists or alarms, are lost!

To access the factory settings, please proceed as follows:

•  Press the 

menu button.

•  Use the 

Up/Down buttons to select "System", and confirm your selection 

with 

OK.

•  Use the 

Up/Down buttons to select "factory settings", confirm the selection 

with 

OK.

•  Now select "Yes" by using the 

Up/Down buttons and confirm with OK.

•  The message "restart" appears in the display - the radio was reset to the 

factory settings, time and date are flashing.

Through  the  system  menu  you  can  display  the  operating  software  available 

on the DABMAN 110. This can be useful if you wish to contact our technical 

support for example. To access the software information proceed as follows:

•  Press the menu button.

•  Use the 

Up/Down buttons to select "System", and confirm your selection 

with 

OK.

•  Use  the 

Up/Down  buttons  to  select  "SW  version",  and  confirm  your 

selection with 

OK.

•  The display now shows the name of the software available on the device 

as ticker text.

No operation possible

The device is hung up

Unplug the device for 

about 5 seconds from 

the power supply and 

turn off the device via 

the slide switch. Then 

reconnect and turn on.

No sound

The volume is too low

Increase the volume by 

using the corresponding 

controller