Renkforce 1007585 User Manual

Page of 8
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). 
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data 
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. 
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved. 
© Copyright 2013 by Conrad Electronic SE. 
b) Solar Module
Dust and dirt on the solar module reduce the output power. Wipe off the solar module 
with a soft, clean cloth from time to time. For stronger contamination, you can moisten 
the cloth slightly with water.
Do not apply too much pressure when cleaning. The glass cover over the solar cells 
may break, which would render the solar module useless. Loss of warranty/guaran-
tee!
Decommissioning, storage
Never leave the product outdoors at outdoor temperatures around or below 0 °C. If ice 
forms, the pump, its extension pipes and the sprinkler attachments may be destroyed. 
Keep the product in a dry and frost-free location after careful cleaning. It must be kept 
out of the reach of children.
Disposal
 
 At the end of its service life, dispose of the product according to the rele-
vant statutory regulations. 
  
Technical Data
a) Pump
Operating voltage .............................. 12 to 24 V/DC
Conveyor height max. ....................... 0.9 m at 12 V/DC (2.4 m at 24 V/DC)
Max. submersion depth .................... 2 m
Conveyor output max.  ...................... 470 l/h at 12 V/DC (740 l/h at 24 V/DC)
Max. water temperature .................. +40 °C
Degree of protection ......................... IP68
Cable length ........................................ 5 m
Dimensions ......................................... 105 x 47 x 74 mm (L x W x H)
Weight ................................................. 415 g (incl. cable)
b) Solar Module
Type ...................................................... polycrystalline
Output performance .......................... max. 10 W
Nominal voltage ................................. 17.28 V/DC
Nominal current ................................. 580 mA
Dimensions ......................................... 400 x 257 x 27 mm (H x W x D)
Weight ................................................. approx. 1207 g