Renkforce Indoor panel mounted lamp TB0045 TB0045 User Manual

 

•   Unauthorised  conversion  and/or  modification  of  the  product  is  not  al-

lowed for safety and approval reasons (CE).

 

•   The LED downlight is not a toy and must be kept out of the reach of chil-

dren! There is danger of a life-threatening electric shock! Install the LED 

downlight out of the reach of children.

 

•   The LED downlight may be operated only on the mains voltage (see sec-

tion “Technical Data”). Never try to operate the product at another volt-

age, as this will cause its destruction.

 

•  The LED downlight is designed according to protection class II.

 

•   During installation, an all-pole disconnecting device must be provided in 

the mains supply circuit (e.g. via RCD).

 

•   The LED downlight may be installed and used only in dry, enclosed indoor 

rooms; it must not get damp or wet! There is danger to life through an 

electric shock!

 

•   Do not mount or use the LED downlight in rooms, or under adverse envi-

ronmental conditions, where combustible gases, vapours or dust are or 

may be present! There is a risk of explosion!

 

•   The LED downlight must not be embedded in heat insulating material (e.g. 

heat insulation mats) (for minimum distance see “Technical Data” sec-

tion).

 

•  The LED downlight must not be operated via a dimmer.

 

•   Use the LED downlight only when it is firmly and steadily mounted. Never 

install the LED downlight in vehicles.

 

•   Do not hang or attach objects (e.g. decorating material) from or to the LED 

downlight.

 

•   The LED downlight must not be exposed to extreme temperatures, strong 

vibrations or heavy mechanical stress.

 

•   If you have reason to assume that safe operation is no longer possible, 

disconnect the LED downight immediately and secure it against inadvert-

ent operation. Thereafter, arrange for an expert to check the LED down-

light.

 

   It can be assumed that safe operation is no longer possible if:

 

-  the LED downlight shows visible signs of damage

 

-   the LED downlight does not work at all or works poorly (where there 

is flickering light, leaking smoke or a burning smell, audible crackling 

noises, or discolouration to the product or to adjacent surfaces)

 

-  the LED downlight was stored under unfavourable conditions

 

-  it was exposed to heavy loads during transport

 

•   Do not leave packaging material carelessly lying around, since it could 

become a dangerous plaything for children.

 

•   In commercial institutions, the accident prevention regulations of the Em-

ployers’ Liability Insurance Association for Electrical Systems and Oper-

ating Facilities are to be observed!

 

•   If you have any questions that are not answered in these operating in-

structions, please contact our technical department or another specialist.

G   Operating Instructions

The product is intended for illuminating indoor areas; it may only be installed and used 

in dry, enclosed indoor rooms. The product is intended for flush-mounted installation, 

e.g. in suspended ceilings.
Any use other than that described above could lead to damage to this product and 

involves the risk of short circuit, fire, electric shock, etc. No part of the product may 

be modified or converted!
The safety instructions must be observed at all times!
This product complies with the applicable national and European requirements. All 

names of companies and products are the trademarks of the respective owners. All 

rights reserved.

•  LED downlight
•  Operating instructions

   The lightning symbol inside a triangle is a warning to inform you of potential 

risks of personal injury, such as electric shock.

   This symbol indicates specific risks associated with handling, function and 

use. 

  The “arrow” symbol indicates special tips and operating information.

   The product is only intended to be installed and used in dry, indoor rooms; it 

must not get damp or wet.

   The product is not dimmable.

   The product is designed according to protection Class II (reinforced or dou-

ble insulation between the mains supply circuit and output voltage; protec-

tive insulation)

   When installing and operating the light, it must not be embedded in the 

insulating material, since this may lead to overheating of the light. Fur-

thermore, there is a fire hazard!

   Keep  a  minimum  distance  between  the  light-emitting  openings  and 

illuminated surfaces (e.g. easily flammable objects, such as curtains, 

etc.). The appropriate minimum distance is specified on the light (in 

the example illustration to the left, the minimum distance is 0.5 m).

   Independent converter (electronic transformer, suitable for external opera-

tion of lights without additional safety measures or covers)

  Short-circuit proof safety transformer

tc 75 °C   The maximum allowed casing temperature is +75 °C (the measurement point 

is marked with “• tc”)

PRI 

Input; for connecting to the mains voltage

SEC +-  Output; for connection to the illuminant

  Observe the operating instructions!