Eurochron Efws 302 X45155 Data Sheet

—

You may select two different alarm times for the weather station.
For this, briefly press the "TIME" (10) button in normal time display. At the bottom
right, the display changes between "ALM1" and "ALM2".

—

After selecting one of the two alarm times, hold down the "ALM" button (9) for
about 2 seconds until the alarm time hours flash.

—

Set the alarm time hours with the "" (6) or "" (7) buttons (for quick
adjustment, keep the button pressed down).

—

Briefly press the "ALM" button (9); the alarm time minutes flash.

—

Set the alarm time minutes with the "" (6) or "" (7) buttons (for quick
adjustment, keep the button pressed down).

—

Briefly press the "ALM" button (9); the "

" icon for temperature pre-alarm

flashes to the left of the alarm time.

(

Temperature pre-alarm is triggered 30 minutes before the actual alarm time
if the outdoor temperature at this time is less than -3 °C (26 °F).
Of course, temperature pre-alarm is only possible when the respective alarm
function (alarm time 1 or 2) is switched on.

—

Use the "" (6) or "" (7) buttons to switch the temperature pre-alarm on
("ON") or off ("OFF").

—

Terminate setting mode by briefly pressing "ALM" (9).
Setting mode is terminated automatically (and all settings are stored) if no button
is pressed for 30 seconds.

d) Activating/Deactivating the Alarm Function
In normal time display, briefly press the "ALM" button (9) several times to switch
alarm time 1 and/or 2 on or off.
"

1"

Alarm time 1 on

" 2"

Alarm time 2 on

" 1" and "

2"

Alarm times 1 and 2 on

No icon

Alarm function off