Gigaset C475IP ECO DECT S30852-H1917-M101 User Manual

Gigaset C470/C475 / Grossbritannien / A31008-M1902-L101-1-7619 / starting.fm / 6.8.07

Ve

rs

ion 4,

 16

.09.

2005

There are notches for attaching the belt 

clip on the side of the handset at the same 

height as the display.

¤

Press the belt clip onto the back of the 

handset so that the protrusions on the 

belt clip engage with the notches. 

¤

Place your fingertip in the cavity on the 

casing and pull the battery cover 

upwards. 

¤

Place the handset in the base station 

with its display facing upwards. 

The handset registers automatically. 

Registration can take up to 5 minutes. 

While this is happening, 

 

appears in the display and the name of the 

base station flashes. The handset is 

assigned the lowest available internal 

number (1-6).

This will appear in the display when regis-

tration is complete, e.g. 

. This means 

that the number 1 has been assigned. 

If the internal numbers 1–6 are already 

assigned to other devices, the number 6 is 

overwritten.

To charge the batteries, leave the handset 

in the base station.

For questions and problems see page 53.

You can connect various headset types 

(with 2.5 mm jack connector), including: 

HAMA Plantronics M40, MX100 and 

MX150.
A compatibility list of tested headsets can 

be found on the Internet at 

– Automatic registration is only possible 

while no calls are being made from the 

base station. 

– Each key press interrupts the automatic 

registration.

– If automatic registration does not work the 

handset will have to be registered manually 

– You can change the name of the handset 

– The handset will automatically switch on if 

it is placed in the base station.

– Only place the handset in the base station 

or charging cradle that is intended for it.