Gigaset C475IP ECO DECT S30852-H1917-M101 User Manual

Product codes
S30852-H1917-M101
Page of 68
43
Using several handsets
Gigaset C470/C475 / Grossbritannien / A31008-M1902-L101-1-7619 / registr_sett.fm / 6.8.07
Ve
rs
ion 4,
 16
.09.
2005
Changing a handset's internal 
number
A handset is automatically assigned the 
lowest free number on registration. If all 
slots are occupied, number 6 is overwrit-
ten if this handset is in idle status. You can 
change the internal number of all regis-
tered handsets (1–6). 
u
Open list of handsets. Your 
own handset is indicated by 
<
§Options§
Open menu.
Edit H/Set No.
Select and press 
§OK§
. The list of 
handsets is displayed.
s
The current number flashes. 
Select a handset.
~
Enter the new internal number 
(1–6). The handset's old 
number is overwritten.
§Save§
Press the display key to save 
the input.
a Press 
and 
hold (idle status). 
You will hear the error tone (descending 
tone sequence) if you assign an internal 
number twice.
¤
Repeat the procedure with a free 
number.
Using a handset as a 
room monitor
If the room monitor is activated, a previ-
ously saved destination number is called 
as soon as a set noise level is reached. You 
can save an internal or external number in 
your handset as the destination number. 
The room monitor call to an external 
number stops after around 90 seconds. 
The room monitor call to an internal 
number (handset) stops after approx. 3 
minutes (depending on the base station). 
When the room monitor is activated, all 
keys are locked except the end call key. 
The handset's speaker is muted. 
When the room monitor is activated, 
incoming calls to the handset are indi-
cated without a ringer tone and are only 
shown on the screen. The display and key-
pad are not illuminated and advisory 
tones are also turned off.
If you accept an incoming call, the room 
monitor mode is suspended for the dura-
tion of the call, but the function remains 
activated.
If you deactivate then reactivate the hand-
set, the room monitor mode remains acti-
vated. 
Activating the room monitor and 
entering the number to be called
v
  
¢
í
 
¢
Room Monitor 
¤
Change multiple line input: 
Room M.:
Select 
On
 to activate.
Call to:
Press the display key 
§Edit§
 and enter des-
tination number.
External number: Select number from 
the directory or enter directly. Only the 
last 4 digits are displayed.
Internal number: 
§INT§
 
¢
s (Select 
handset or 
Call All
 if all registered hand-
sets are to be called) 
¢
§OK§
.
Store number with 
§Save§
.
Warning!
– You should always check the operation 
of the room monitor before use. For 
example, test its sensitivity. Check the 
connection if you are diverting the room 
monitor to an external number. 
– When the function is switched on, the 
handset's operating time is severely 
reduced. If necessary, place the handset in 
the charging cradle. This ensures that the 
batteries do not run down.
– Ideally the handset should be positioned 1 
to 2 metres away from the baby. The micro-
phone must be directed towards the baby. 
– The connection to which the room monitor 
is diverted must not be blocked by an acti-
vated answer machine.