Gigaset E365 E365ECO User Manual

Gigaset E365 / GBR / A31008-M1806-L101-1-7619 / starting.fm / 12.09.2007

Ver

si

on 4, 16.

09.20

05

¤

If fitted, remove the belt clip.

¤

Reach into the housing cavity and pull 

the battery cover upwards.

Requirement: the handset must not 

already be registered on any base station. 
Registering the handset on the Gigaset 

E365 base station occurs automatically. 

¤

Place the handset in the charging cra-

dle of the base station with its display 

facing forward. 

You will hear a confirmation tone.
Automatic registration can take up to 

5 minutes. While registration is in 

progress the screen displays 

. 

The handset is assigned the lowest unas-

signed internal number (1–4). If several 

handsets are registered on the base, the 

internal number is shown in the display 

after registration, for example 

. This 

means that the handset has been 

assigned the internal number 2.

¤

To charge the batteries, leave the hand-

set in the charging cradle on the 

base station. 

For questions and problems see page 36.

– Automatic registration is only possible if 

the base station on which you wish to reg-

ister the handset is not being used to make 

a call. 

– A key press cancels automatic registration.
– If four handsets are already registered on 

the base station there are two options:
– The handset with the internal number 4 

is in idle status: the handset you wish to 

register is assigned the number 4. The 

handset that was previously number 4 

is de-registered.

– The handset with the internal number 4 

is being used: the handset you wish to 

register cannot be registered.

– If automatic registration does not work the 

handset will have to be registered manually 

– The handset may only be placed in the 

base/charging cradle provided for it.

– If the handset has switched itself off 

because the batteries are flat and is then 

placed in the base/cradle, it will switch 

itself on automatically.