Gigaset E365 E365ECO User Manual
Product codes
E365ECO
11
First steps
Gigaset E365 / GBR / A31008-M1806-L101-1-7619 / starting.fm / 12.09.2007
Ver
si
on 4, 16.
09.20
05
Initial charging and discharging of
batteries
Battery charging is indicated in the top
right of the display by a flashing battery
icon
e, V or U. During handset
operation, the battery icon indicates the
charge status of the batteries (page 1).
The correct charge status can only be dis-
The correct charge status can only be dis-
played when the batteries are first fully
charged and discharged through use.
¤
To do this, leave the handset in the
base without interruption until the bat-
tery icon stops flashing in the display
(approx. 6h).
¤
Once the batteries are fully charged,
remove the handset from the base and
do not put it back again until the batter-
ies are fully discharged.
Please remember:
u Always repeat the charging and dis-
charging procedure if you remove the
batteries from the handset and re-
insert them.
u The batteries may warm up as they are
charging. This is not dangerous.
u After a time the charge capacity of the
batteries will decrease for technical
reasons.
Setting the date and time
§Menu§
¢
Settings
¢
§OK§
¢
Date/Time
¢
§OK§
~
Enter the day, month and year
with 6 digits and press
§OK§
.
Use
q to move between the
fields.
~
Enter hours and minutes with
4 digits (e.g. 0 7 1 5 for
07.15 hrs) and press
§OK§
.
Use
q to move between the
fields.
Once the phone is registered and the
time set, the idle display looks as shown
on page 1.
Your phone is now ready for use.
The answering machine is set with a
standard announcement.
Please note:
After the first battery charge and discharge
you may replace your handset in its base after
every call.
Please note:
You will find explanations for the symbols and
typographical conventions used in this user
guide in the appendix, page 36.