Speaka Professional 431801 HDMI socket to VGA plug, Jack plug 3.5 mm Adapter 431801 User Manual

These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau (www.conrad.com). 
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data 

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. 
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.

The product has been designed to convert a digital HDMI compatible AV signal into an 

analogue VGA video signal and an analogue audio signal. The converter is powered via built-in 

USB cable. It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. 

in bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you 

use the product for purposes other than those described above, the product may be damaged. 

In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc. 

Read the instructions carefully and keep them. Make this product available to third parties only 

together with its operating instructions.
This product complies with the statutory national and European requirements. All company 

names and product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.

•  HDMI to VGA converter
•  Operating instructions

•  When disconnecting the plugs from the sockets, never pull the plug by its cord. Always pull 

by the designated gripping surfaces.

•  Make sure the cables do not get crimped, bent or damaged by sharp edges.
•  The device is not a toy. Keep it out of the reach of children and pets.
•  Do not leave packaging material lying around carelessly. These may become dangerous 

playing material for children.

•  Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, 

moisture, flammable gases, vapours and solvents.

•  Do not place the product under any mechanical stress.
•  If it is no longer possible to operate the product safely, take it out of operation and protect it 

from any accidental use. Safe operation can no longer be guaranteed if the product:

 - is visibly damaged, 
 - is no longer working properly, 
 - has been stored for extended periods in poor ambient conditions or 
 - has been subjected to any serious transport-related stresses.

•  Please  handle  the  product  carefully.  Jolts,  impacts  or  a  fall  even  from  a  low  height  can 

damage the product.

•  Also observe the safety and operating instructions of any other devices which are connected 

to the product.

•  Consult an expert when in doubt about operation, safety or connection of the device.
•  Maintenance, modifications and repairs are to be performed exclusively by an expert or at 

a qualified shop.

•  If you have questions which remain unanswered by these operating instructions, contact our 

technical support service or other technical personnel.

•  Make sure to switch off any device to be connected to the converter.
•  Use an HDMI cable to connect the HDMI port of the converter to the HDMI output of the 

playback device (e.g. Blu-ray player).

•  Connect the VGA plug of the converter to the VGA port of the display device (e.g. projector, 

monitor).

•  Connect the 3.5 mm jack plug of the converter to the audio input (microphone connector) of 

the display device.

•  In order to supply the converter with power, connect the USB plug of the converter to a USB 

port. The USB port must provide a minimum output power of 500 mA (e.g. USB port on the 

back of a computer, USB hub with mains adapter or USB mains adapter). When connecting 

to the USB port at the back of a computer, the use of an optional USB extension cord might 

be necessary.

•  Switch all devices connected to the converter on. The converter is ready for use.
•  The  POWER  LED  lights  up  once  the  converter  is  connected  to  the  power  supply.  The 

ACTIVE LED lights up once a video signal is being transmitted.

The  display  device  must  support  the  resolution  of  the  playback  device.  When 

feeding a 720p HDMI signal, for example, the playback device must be able to 

display a resolution of 1280 x 720. If not, the image might be distorted or not be 

displayed at all. In such a case you may either adjust the playback device to a lower 

resolution of the HDMI signal or use a monitor/projector with higher resolution.
If the playback device features more than one HDMI output, make sure to activate 

the correct HDMI output.
The converter works independently from the operating system of the computer, 

making the use of software or drivers unnecessary.
The USB cable is only intended for power supply. It does not support the transfer 

of data.

•  Before cleaning the product, switch off all connected devices and unplug any connected 

cables.

•  The  product  is  maintenance-free  and  does  not  require  any  care  except  for  occasional 

cleaning with a soft, dry cloth.

•  Never  use  aggressive  cleaning  agents  or  chemical  solution,  as  such  could  damage  the 

surfaces of the housing.

Electronic devices are recyclable waste and must not be disposed of in the household 

waste. At the end of its service life, dispose of the product according to the relevant 

statutory regulations. 

You thus fulfil your statutory obligations and contribute to the protection of the environment.

Operating voltage ............................. 5 V/DC via USB
Input signal ....................................... HDMI (video + audio)
Output signal .................................... VGA (video), stereo analogue (audio)
Supported resolution  ....................... max. 1920 x 1080
Operating conditions ......................... 0 to +70 ºC, 0 – 90 % RH
Storage conditions ............................ 0 to +80 ºC, 0 – 90 % RH
Dimensions (W x H x D) ................... 81 x 16 x 52 mm (without cable)
Weight .............................................. 172 g