SWITEL BCF 990 BCF990 Data Sheet

3

1.

into the monitor. See Fig. 5.

Note :  Use the adapter labeled OUTPUT: 6V DC with the monitor.
2. Press the POWER button         and keep it around 3 seconds to turn the monitor 

on. See Fig. 5.

Note 1:  When power on the monitor, "Power" LED will light up (green light).                
Note 2:  "Out of Range" will be displayed on the LCD screen if the monitor
                exceeds the range (unlink).
Note 3:  Press the POWER button and keep it around 3 seconds to turn off the
                monitor.

The monitor can control the movement of the camera. The camera head has the
ability to rotate up, down, right and left. Press the up         or down         buttons
on monitor to move the camera up or down. Press the left         or right        buttons
on monitor to move the camera left or to the right. See Fig. 6.

Press the Zoom/OK button         on monitor once for a 2X zoom of image and press 
again to change back to normal view. See Fig. 7.

1. Press the VOX button        on the monitor unit to enable the VOX function. 

This will turn OFF the screen but the VOX LED        will remain ON (green)

 

to remind you the VOX function is enabled.  See Fig. 8.

2. When the sound from the camera reaches the setting level (See Fig. 17), the 

screen will turn ON 

automatically. It will turn OFF 

again after 30 seconds. If 

the sound from the camera still reaches the setting level during the 30 seconds, 
it will extend 30 seconds to turn OFF 

the screen from the last voice event. 

1. Press the volume setup button        to enter volume setup. See Fig. 9.
2. Press up        or down        buttons to adjust volume level, and then press ok 

button        to confirm the setting. Fig. 9.

Press the talkback button        to speak through the camera unit, and the        icon
will then be displayed on the screen. See Fig. 10.

Plug one end of the provided power adapter into a wall outlet and the other end