SWITEL BCF 990 BCF990 Data Sheet

Product codes
BCF990
Page of 54
6
You don't getting any signal at all
Ÿ
Ÿ Make sure the power plugs are pushed all the way in.
If the signal is poor, or there is interference
Ÿ If there is a microwave oven in use in the path between the camera and
      monitor, remove the microwave oven or turn it off.
Ÿ Make sure the camera and the monitor are within range of each other
      (range of approximately 500 feet; 150 meters in a clear line of sight).
Ÿ If the power LED is on but only voice signal input is detected, the monitor
      can be in voice-activated mode.  Press the VOX button to turn on the screen.
Care and Maintenance
Ÿ Keep all parts and accessories out of  children's reach.
Ÿ
 Fingerprints or dirt on the lens surface can adversely affect camera 
      performances. Avoid touching the lens surface with your fingers.
Ÿ
 Should the lens become dirty, use a blower to blow off dirt and dust, or a  
      soft, dry cloth to wipe off the lens.
Ÿ
 Keep the camera dry. Precipitation, humidity, and other liquids contain
      minerals will corrode electronic circuits.
Ÿ
 Do not use or store in dusty, dirty areas.
Ÿ
 Do not store in hot areas. High temperatures can shorten the life of 
      electronic devices and warp or melt certain plastics.
Ÿ
 Do not store in very cold areas. When the system warms up (to its normal
      temperature), moisture can form inside the case, which may damage
      electronic circuit boards. 
Ÿ
 Do not attempt to open the case. Non-expert handling of the device may
      damage the system.
Ÿ
 Avoid dropping or strong shocks.
Ÿ
 Operate this product using only with the power supply included or provided
      as an accessory.
Ÿ
 Do not overload electrical outlets or extension cords  this can result in fire 
      or electric shocks.
Ÿ
 Do remember that you are using public airwaves when you use the system
      and that sound and video may be broadcast to other 2.4 GHz receiving
      devices. Conversations, even from rooms near the camera, may be
      broadcast.To protect the privacy of your home, always turn the camera off
      when not in use.  
Troubleshooting
Make sure the camera and the monitor are turned on.