Voltcraft BS-10 USB Endoscope BS-10 Data Sheet

- Connect the borescope; start-up of the program “AMCAP” as described under “Initial opera-

tion”  and select the driver “Telescope driver” under “Devices”.

- The camera picture is displayed.
- Via the controller “3” the camera brightness can be adjusted.

Selection of the memory location for video recordings
(avi). The ending “.avi” must be indicated. 

Set the memory size The available size is displayed.
Under the menu point “Capture File Size” the size can
be entered.

Saving of a recorded video sequence

Exit the program

Real-time display in the main window

Start of a video recording. Confirm the displayed stor-
age location with “OK”.

Stops the recording.

Set frame rate for the recording (Pictures/sec.)

Input of a max. recording time in 
seconds

Under the main window, the amount of the recorded images is displayed in the status line.

☞

The supplied driver is „TWAIN32 compatible“. Thus, the camera can be operated
with every program that supports this interface. 

- In order to save individual pictures, press the key “6” on the borescope. Another window

opens displaying the snapshot image. 

- Under the menu point „File“ you can save the picture (Save) or discard and exit (Exit).
- Under the menu point “Rotate orientation” you can rotate the picture. 

The magnetic top can be placed on the camera head. In this way, lost metal parts can be
searched for and found. 

The product requires no servicing on your part apart from occasional cleaning. Use a soft, anti-
static and lint-free cloth for cleaning. 
Rinse the gooseneck of the borescope carefully with clean water after each application in liq-
uids and dry it before storing it in the case. 

Electronic products are raw material and do not belong in the household waste.
When the device has become unusable, dispose of it in accordance with the
current statutory regulations at the communal collection points. Disposing of it-
among the household waste is prohibited.

Resolution

640 480 Pixel (VGA)

Frame rate

30 fps (pictures/sec)

Picture

24 Bit RGB Colour (1/6” CMOS)

White comparison

automatic

Exposure to light

automatic

Video format

AVI

Camera illumination

2 LEDs, white

USB port

USB 1.1

Power Supply

5V via USB

Ambient/ operating temperature

0 to +45°C

Cable length:

approx. 200 cm

Total length of device

88 cm

Effective length of borescope

66 cm

Minimum Bending radius

6 cm

Diameter of camera head

1.4 cm

Lens coverage

54°

Focus

> 6cm

Weight without accessories 

approx. 320 g

These operating instructions are a publication by Voltcraft

®

, Lindenweg 15, D-92242 Hirschau/Germany, Phone +49 180/586 582 7 (www.voltcraft.de). 

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. 

These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.

