Tascam DR-05 User Manual
88
TASCAM DR-05
TASCAM DR-05 has a built-in tuner. The unit receives a
sound from a musical instrument and allows you to tune
it accurately on the tuning meter shown in the display.
Using the tuner
Setting the tuner
1 Press the MENU button to open the
MENU
screen.
2 Use the + or − button to select
OTHERS
, and press
the Á button to open the
OTHERS
submenu.
3 Use the + or − button to select
TUNER
, and
press the Á button.
TUNER
screen appears.
The
TUNER
screen contains the
CALIB
option
to set the fundamental frequency of the A.
Press the  or ¯ button to decrease or
increase the fundamental frequency.
Setting range: 435Hz - 445Hz (in 1Hz
Setting range: 435Hz - 445Hz (in 1Hz
increments, default: 440Hz)
Tuning a musical instrument
1 Open the
TUNER
screen, and sound a note
near the unit.
2 Tune the instrument so that the target pitch
name appears and the center of the tuner lights.
A bar appears on the left or right of the center
A bar appears on the left or right of the center
if the sound is lower or higher than the target
pitch. The bar becomes longer as the sound
shifts away from the target pitch.
Adjusting the input level for tuning
1 Press the QUICK button to switch
CALIB
to
INPUT
LEVEL
in the bottom of the
TUNER
screen.
2 Use the  or ¯ button to adjust the input
level. The pull-up display appears to show the input
level setting. See “Manually adjusting the input
level” on page 48 for the adjustment operation.
8-Tuning a Musical Instrument (Tuner)