Futaba 6J F4103 Data Sheet

key until the sub-trims (STRM) menu appears on screen. 

4)  Press the SELECT button to choose the channel for which you wish to adjust the 

sub-trims.  The channel is indicated on the left side of the LCD screen.

5) Press the DATA INPUT lever to change the sub-trim value for the selected channel.  

<# # +$  + = {›|{${#
’ˆ&#;## +$ + = 
numeric value on the right side of the screen.

6) Repeat steps 1-3 for all channels as desired.

Note:  !  #! }‹%’~ # !#   "!      # {‹# ># 
Programming”, the information that follows is only applicable to airplane (ACRO) models.  

‚#"  {' &|  }&!# #~ '  #   + &   $  
T6J also contains two programmable mixes where you, the pilot, determine the channels to be mixed.  
<+# &  # +     ' =   }+  &   # 
aileron to rudder for example).

Note: Programmable Mixes 1 and 2 are programmed in the exact same manner and methodology.  As such, 
we will only explain how to program one of the mixes.  Should a second mix be necessary, follow this 
procedure once again for the second mix accordingly.

1) Turn the transmitter on.

2) Press and hold the MODE button to access the programming mode.

3) Press either the MODE key OR the END key to scroll through the function 

menus.  Each time one of the aforementioned keys is pressed the menu will change 
# ! K>ˆ%%[ˆ" #  !+#
mix (PMX 1) menu appears on screen. 

4) Push the DATA INPUT lever upward for 0.5 seconds.  This will cause the INH 

 !# = !# += >[ !# 

5) Press the SELECT key twice to call the screen for selecting channels to control 

{K*_|}K ~&; ##+ ! ˆ*;*[<‚;#