Jeti 11-channel receiver 2.4 GHz FHSS with Connector system JR 80001225 User Manual
Product codes
80001225
computer radio control system
EN
output assignments) will be disabled (there will be no servo signal
generated at the remaining outputs).
generated at the remaining outputs).
The receiver may be set-up in such a way, that its output will work in
digital communication form, which will be used as input by other
equipment.
digital communication form, which will be used as input by other
equipment.
EX bus* - in this setup information about servo throws will be
generated in EX protocol format. EX protocol represents a
bidirectional digital communication, which transmits throw and
telemetry information with configuration possibilities of
equipment connected to this bus, for instance, by a DC/DS
transmitter. This interface is physically accessible at the receiver
output labeled „EXT“. When setting up the alternative “EX bus“, all
receiver outputs with exeption of output „EXT“ will be disabled
(there will be no servo signal generated on them). This
configuration type is used, for instance, when receivers are
connected for example Central Box.
generated in EX protocol format. EX protocol represents a
bidirectional digital communication, which transmits throw and
telemetry information with configuration possibilities of
equipment connected to this bus, for instance, by a DC/DS
transmitter. This interface is physically accessible at the receiver
output labeled „EXT“. When setting up the alternative “EX bus“, all
receiver outputs with exeption of output „EXT“ will be disabled
(there will be no servo signal generated on them). This
configuration type is used, for instance, when receivers are
connected for example Central Box.
*Setup valid for DUPLEX Rsat 2 receivers or US version receivers.
OutputChannelCnt - setup of generated number of receiver
outputs. If the receiver receives less channels than selected in
setup, the remaining channels will be replaced by a throw specified
by the Fail Safe value for individual channels. Otherwise, the
number of output pulses will be reduced to the setup number.
outputs. If the receiver receives less channels than selected in
setup, the remaining channels will be replaced by a throw specified
by the Fail Safe value for individual channels. Otherwise, the
number of output pulses will be reduced to the setup number.
Rx mode - the working mode of the receiver. Possible choices:
Normal - bidirectional communication between receiver and