Futaba 10J F4109 Data Sheet

① Call the menu screen from the 

home screen by pressing the + 

key for 1 second.

＋

② Select 

    from the menu with the 

Jog key.

③ Open the setting screen by 

pressing the Jog key.

（1 second）

● Select the setting item 

with the Jog key.

● The number is changed 

by + key or – key.

● Amount of compensation 

of the elevator when the 

camber changed.

● Flap1

● Aileron1

● Camber MIX ACT/INH

Sets the amount of 

movement  when 

the VR was turned.

Sets the amount of 

movement  when 

the VR is turned.

● Flap2

● Aileron2

● Can be set to operate 

from a switch. When 

NULL, it is operated by 

a VR.

● Flap3

● Flap4

● Elevator

（Currently selected condition）

（Currently selected condition）

＋

－

All the wing control surfaces are 

lowered and the camber is increased 

(lift increases)

Attitude changes are compen-

sated for by setting the 

amount of elevator movement.

Attitude changes are compen-

sated for by setting the 

amount of elevator movement.

All the wing control surfaces are 

raised and the camber is 

decreased (lift decreases)

This function adjusts the rate of camber 

operation for the wing camber (ailerons, camber 

flaps, brake flaps) in the negative and positive 

directions. The aileron, flap, and elevator rates 

can also be adjusted independently and attitude 

changes caused by camber operation can be 

corrected.

*Initial setting assigns camber operation to side lever DT6.

● Operation can be turned on and off by switch

● VR can be changed by AUX channel 10

( R AT E1)：T h e  a m o u n t  o f 

operations when VR is turned to 

the right.

( R AT E2)：T h e  a m o u n t  o f 

operations when VR is turned to 

the left.