Futaba 10J F4109 Data Sheet

① Call the menu screen from the 

home screen by pressing the + 

key for 1 second.

＋

② Select 

    from the menu with the 

Jog key.

③ Open the setting screen by 

pressing the Jog key.

（1 second）

● (RATE1) and (RATE2) show 

the direction of elevator of 

operation.

Aileron1

(CH1)

Aileron2

(CH7)

Flap4

(Brake Flap)

(CH9)

Flap3

(Brake Flap)

(CH8)

Flap2

(Camber Flap)

(CH6)

Flap1

(Camber Flap)

(CH5)

Elevator
(CH2)

Up the elevator

flap is down

● Select the setting item 

with the Jog key.

● The number is changed 

by + key or – key.

● Current position of the 

elevator stick

● Described  on 

the next page.

● Flap1

● Aileron1

● Camber MIX ACT/INH

Mixing rate

Mixing rate

● Flap2

● Aileron2

● Can be either set to a 

switch or when NULL is 

always active.

● Flap3

● Flap4

（Currently selected condition）

（Currently selected condition）

＋

－

This function is used when you want to mix the 

camber flaps with elevator operation. When used,  

the flaps are lowered by up elevator, and lift is 

increased.

● In-flight mixing can be turned ON/OFF by assigning 

this to a switch. (Always ON at SW [NULL] setting)

● The mixing rate can be adjusted.

● Setting so that the flaps are not operated near the 

center of the elevators is possible. (RANGE)