Futaba 10J F4109 Data Sheet
Product codes
F4109
62
Common function
① Select the "HOME-DSP" item and change the mode
by pressing the + key or – key.
● "Futaba":Display about a Futaba logo.
"USR-NAME":Display about a user name.
"DT5/DT6":Display about the position of DT5
and DT6
"RX BATT":Display about the receiver battery
voltage
"THR/PIT":Display about the position of pitch
and throttle.
Selection range:
Futaba, USR-NAME,DT5/
DT6, RX BATT, THR/PIT(*)
Default:Futaba
*Only Heli mode can be chosen
about THR/PIT.
① Select the "BATT ALM" item and change the
numerical value (voltage) by pressing the + key or
– key.
+
-
or
● AA alkaline batterys ⇒ 4.2V DRY4
● Futaba HT5F1800B ⇒ 5.0V NiMH5
● Futaba FT2F2100B ⇒ 5.8V LiFe2
● Futaba HT5F1800B ⇒ 5.0V NiMH5
● Futaba FT2F2100B ⇒ 5.8V LiFe2
Selection range:
4.2V 4.6V 5.0V 5.4V 5.8V
6.2V 6.6V 7.0V 7.4V
■
Back-light mode
Select the "BACK-LIT" item and
change the mode by pressing the
+ key or – key.
+
-
or
● "ALWAYS":always ON
"OFF":always OFF
"KEY-ON":It light on after
Key operation.
■
Light-time
Select the "LIT-TIME" item and
change numerical value (time) by
pressing the + key or – key.
+
-
or
● It is only a case in "KEY-ON"
mode here.
■
Light-adjustment
S e l e c t t h e " L I T - A D J " i t e m
and change numerical value
(brightness) by pressing the + key
or – key.
+
-
or
● It is the brightest at 30.
Selection range:
ALWAYS, OFF, KEY-ON
Default:ALWAYS
Selection range:1 〜 30(s)
Default:10(s)
● When you want to return the set
value to the initial value, press the
+ key and – key simultaneously.
Selection range:1 〜 30
Default:15
● When you want to return the set
value to the initial value, press the
+ key and – key simultaneously.
Home display
Battery alarm voltage
Back-light / Light-time / Light-adjustment
*The voltage drop of a rechargeable battery
and a dry cell battery is different. When
using a rechargeable battery, always
change the voltage.
+
-
① Select the "CONTRAST" item and change numerical
value (contrast) by pressing the + key or – key.
+
-
Selection range:-10 〜
+10
Default:0
LCD contrast
or