Clicc ClicSwing + Cliclite Night 817 CliccLite 170 mWp, 35 mA, CliccSwing1100 mWp, 190 mA, Kristallin Silizium 817 Data Sheet

Product codes
817
Page of 2
User Manual ClicSwing
 
© Sonnenrepublik 08/2014 
ClicSwing is a foldable miniature solar direct-charger. In full sunshine 
it generates a loading current of 200mA at the USB-port, thanks to 
its  highly  efficient  solar  cells.  This  matches  the  approximate 
consumption of a cell phone/smart phone actively used. ClicSwing is 
part of the modular Clicc system. The integrated contact pins enable 
sticking  several  ClicSwings or  Clicc  solar  modules  together.  Due  to 
this,  performance,  form  and  color  of  the  modular  fields  can  be 
chosen individually.  
Please  read  the  instructions  manual  carefully  before  using  this 
product for the first time. 
Safety instructions / Liability: 
The solar cell encapsulation can be penetrated by use of scissors or 
screwdrivers which will cause damage to the product.  
Do not use the device under humid conditions or in case liquids have 
been  inserted.  If  liquids  have  penetrated  the  device  it  is  urgently 
necessary to immediately disconnect the device, pour out the liquid 
from the USB socket and dry it. 
Any  unqualified  modification  or  use  of  the  device  other  than 
described  above  is  not  allowed  and  may  cause  damage.  The 
guarantee will expire in case of unqualified usage or of ignoring this 
manual. We do not assume any liability for damages arising thereof.  
The delivery contents: 
The ClicSwing is delivered with the following basic equipment: 
•  Basic device ClicSwing white  
•  Manual 
 
Activation, Use and Functions 
ClicSwing is ready for use straight after unpacking. The loading of the 
end  product  can  start  immediately  because  there  is  no  battery 
integrated. All products which are charged through a USB-A interface 
qualify as end products. The generated 200mA can be used straight 
ahead to charge all smart phones, which do not  require a specific 
minimum charging current. To start loading your end product, open 
the ClicSwing, put it into the nearest light source and adjust it to the 
light.  Connect  your  end  product  through  the  USB  cable  to  the 
ClicSwing.  The  charging  process  should  happen  outside  in  direct 
sunshine  (if  possible).  Otherwise  the  consumption  of  internal 
electricity (especially of some specific smart phones) may be higher 
than the charging current and cause a discharging of the end product. 
The green LED lights up during the charging process proportionally 
to the charging current.  
 
 
 
 
 
 
 
 
 
 
 
 
 
To  hang  the  ClicSwing  into  a  window  or  to  set  it  up  into  direct 
sunshine, use the bracket and lug at the side which can be pushed 
outward with a little lever.  
Extension and Bundles 
ClicSwing can be combined with further Clicc modules or ClicSwing 
rechargers. To do this, simply connect the individual modules with 
the  contact  pins  at  the  margins.  The  chart  displays  exemplary 
particular loading currents in full sunshine.  
 
Clic-
Swing 
Additional 
components 
Charging 
current 
USB 
Charging time / 
compensation 
operating performance 
1x  -- 
200mA 
Mobile 10 – 16h / 
Phone/Internet ca. 50-70% 
1x  4x Clicc Modul  310mA 
Mobile 5 – 8h / 
Phone/Internet ca. 90-
130% 
2x  -- 
400mA 
Mobile 4 – 6h / 
Phone/Internet ca. 110-
170% 
1x  8x Clicc Modul  420mA 
Mobile 3 – 4,5h / 
Phone/Internet ca. 170-
210% 
1x  1x Powerbank 
4000mAh 
Max. 
1000mA 
Mobile 1,5-2,5h (Mobile no 
direct operation) 
 
Storage and maintenance  
The  ClicSwing  shouldn’t  kept  at  hot  (more  than  50°C)  or  wet 
locations.  It  also  shouldn’t  be  exposed  to  any  aggressive 
environment. As no battery is included the nearly unlimited durable. 
The surfaces can be cleaned with a soft towel and warm water or a 
soft detergent once in a while.  
Technical data: 
Rated  power  solar  panel:  1100mWp  with  full  sun  and  25°C 
temperature of the solar panels  
USB  output  voltage/  current:  200mA  @  4,5V  /  180mA  @  5,0V 
(stabilized) 
Temperature: -20 … +50°C  
Maximum relative humidity: 90% 
Measures / weight: 85 x 70 x 9mm, 9g  
Compliance / standards: CE, RoHS, EN 61006-4 
 
 
Disposal of waste: 
Electronic devices, primary and secondary batteries must 
not be treated as household waste. You can return used 
products optionally at municipal collection, trading spots 
or directly at our address (see below) - everywhere free 
of charge. Please pay attention to EU regulation 2002/96/EC. 
Used batteries may contain polluted material, or heavy metal that 
may cause severe effects on environment and health. Batteries can 
be recycled as they contain important raw materials like 
cobalt, manganese, aluminum or nickel.  
Disposal  of  all  packaging  material  should  be  done 
according to environmental standards. 
 
Guarantee: 
We  provide  a warranty  of  24  months  from  the  delivery  date.  It  is 
limited to all faults of production and material except the ones men-
tioned below. There is no right of complaint if there is only a neglect 
able deviance from the agreed quality, a minor restriction of useful-
ness or natural deterioration. Damage due to wrong or incompetent 
treatment, extreme usage or damage based on unusual external ef-
fects that have not been considered in the agreement also lead to 
no  right  of  complaint.  In case  you  or  a third person might  do  im-
proper repair work or modifications, there is also no right of com-
plaint  concerning  the  consequences  of  these  modifications.  The 
modification or removal of the device's components is also consid-
ered as inadequate usage. Please contact us in case of a complaint 
before returning an item. 
 
Sonnenrepublik GmbH 
Reuchlinstr. 10-11, Staircase S, 10553 Berlin 
service@sonnenrepublik.de, www.sonnenrepublik.de