Uniden UBC 92 XLT handheld scanner 122C11 Data Sheet
Product codes
122C11
51
Care and Maintenance
Care and Maintenance
Keep the scanner dry. If it gets wet, wipe it dry
immediately. Use and store the scanner only in
normal temperature environments. Handle the
scanner carefully: do not drop it. Keep the scanner
away from dust and dirt, and wipe it with a damp
cloth occasionally to keep it looking new.
immediately. Use and store the scanner only in
normal temperature environments. Handle the
scanner carefully: do not drop it. Keep the scanner
away from dust and dirt, and wipe it with a damp
cloth occasionally to keep it looking new.
General Use
•
Turn the scanner off before disconnecting the
power.
power.
•
Always write down the programmed frequencies
in the event of memory loss.
in the event of memory loss.
•
If memory is lost, simply reprogram each
channel. The display shows 000.000 in all
channel. The display shows 000.000 in all
channels when there has been a memory loss.
•
Always press each button firmly until you hear
the entry tone for that key entry.
Location
•
Do not use the scanner in high-moisture
environments such as the kitchen or bathroom.
environments such as the kitchen or bathroom.
•
Avoid placing the unit in direct sunlight or near
heating elements or vents.
heating elements or vents.
•
If the scanner receives strong interference or
electrical noise, move it or its antenna away from
the source of the noise. If possible, a higher
elevation might provide better reception.
electrical noise, move it or its antenna away from
the source of the noise. If possible, a higher
elevation might provide better reception.
•
Also try changing the height or angle of the
antenna.
antenna.
Cleaning
•
Disconnect the power to the unit before
cleaning.
cleaning.
UB340ZH Paper OM reduced size.fm Page 51 Monday, September 26, 2005 2:56 PM