Voltcraft 100 - 240 VCharger ForLiPolymer, LiFeRechargeable batteries SK-1000555 User Manual
Product codes
SK-1000555
35
8. MAKING A CHARGING CABLE
If you do not already have one, make a suitable charging cable. To this end, a prepared cable
(9) with two 4 mm banana plugs (10) on one end and open cable ends (11) on the other is
included with the product.
Figure 2
Suitable reverse polarity protected connectors must be soldered to the open cable ends; the
connectors must fit the connectors on the rechargeable battery. Make sure the connectors
connect securely to the cables and heed correct polarity:
Red = positive (+)
Black = negative (-)
Insulate the soldered connects with shrink tubing.
Red = positive (+)
Black = negative (-)
Insulate the soldered connects with shrink tubing.
The charging cable (see figure 2, Pos. 9) is depicted coiled up for phototechnical
reasons only. The cable may not be coiled up when used for charging.
11
9
10