Microchip Technology IC MCU 8BIT PIC18F65K22-I/PT TQFP-64 MCP PIC18F65K22-I/PT Data Sheet
Product codes
PIC18F65K22-I/PT
PIC18F87K22 FAMILY
DS39960D-page 262
2009-2011 Microchip Technology Inc.
In addition to the expanded range of modes available
through the CCPxCON and ECCPxAS registers, the
ECCP modules have two additional registers associated
with Enhanced PWM operation and auto-shutdown
features. They are:
• ECCPxDEL – Enhanced PWM Control
• PSTRxCON – Pulse Steering Control
through the CCPxCON and ECCPxAS registers, the
ECCP modules have two additional registers associated
with Enhanced PWM operation and auto-shutdown
features. They are:
• ECCPxDEL – Enhanced PWM Control
• PSTRxCON – Pulse Steering Control
20.1
ECCP Outputs and Configuration
The Enhanced CCP module may have up to four PWM
outputs, depending on the selected operating mode.
The CCPxCON register is modified to allow control
over four PWM outputs: ECCPx/PxA, PxB, PxC and
PxD. Applications can use one, two or four of these
outputs.
The outputs that are active depend on the ECCP
selected operating mode. The pin assignments are
summarized in
outputs, depending on the selected operating mode.
The CCPxCON register is modified to allow control
over four PWM outputs: ECCPx/PxA, PxB, PxC and
PxD. Applications can use one, two or four of these
outputs.
The outputs that are active depend on the ECCP
selected operating mode. The pin assignments are
summarized in
To configure the I/O pins as PWM outputs, the proper
PWM mode must be selected by setting the PxM<1:0>
and CCPxM<3:0> bits. The appropriate TRIS direction
bits for the port pins must also be set as outputs.
PWM mode must be selected by setting the PxM<1:0>
and CCPxM<3:0> bits. The appropriate TRIS direction
bits for the port pins must also be set as outputs.
20.1.1
ECCP MODULE AND TIMER
RESOURCES
RESOURCES
The ECCP modules use Timers, 1, 2, 3, 4, 6, 8, 10 or 12,
depending on the mode selected. These timers are
available to CCP modules in Capture, Compare or PWM
modes, as shown in
depending on the mode selected. These timers are
available to CCP modules in Capture, Compare or PWM
modes, as shown in
TABLE 20-1:
ECCP MODE – TIMER
RESOURCE
RESOURCE
The assignment of a particular timer to a module is
determined by the timer to ECCP enable bits in the
CCPTMRSx register (
determined by the timer to ECCP enable bits in the
CCPTMRSx register (
). The interactions
Capture operations are designed to be used when the
timer is configured for Synchronous Counter mode.
Capture operations may not work as expected if the
associated timer is configured for Asynchronous Counter
mode.
timer is configured for Synchronous Counter mode.
Capture operations may not work as expected if the
associated timer is configured for Asynchronous Counter
mode.
20.1.2
ECCP PIN ASSIGNMENT
The pin assignment for ECCPx (Capture input,
Compare and PWM output) can change, based on
device configuration. The ECCPMX (CONFIG3H<1>)
Configuration bit determines which pins ECCP1 and
ECCP3 are multiplexed to.
• Default/ECCPMX = 1:
Compare and PWM output) can change, based on
device configuration. The ECCPMX (CONFIG3H<1>)
Configuration bit determines which pins ECCP1 and
ECCP3 are multiplexed to.
• Default/ECCPMX = 1:
- ECCP1 (P1B/P1C) is multiplexed onto RE6
and RE5
- ECCP3 (P3B/P3C) is multiplexed onto RE4
and RE3
• ECCPMX = 0:
- ECCP1 (P1B/P1C) is multiplexed onto RH7
and RH6
- ECCP3 (P3B/P3C) is multiplexed onto RH5
and RH4.
The pin assignment for ECCP2 (Capture input,
Compare and PWM output) can change, based on the
device configuration.
The CCP2MX Configuration bit (CONFIG3H<0>)
determines which pin ECCP2 is multiplexed to.
• If CCP2MX = 1 (default) – ECCP2 is multiplexed
Compare and PWM output) can change, based on the
device configuration.
The CCP2MX Configuration bit (CONFIG3H<0>)
determines which pin ECCP2 is multiplexed to.
• If CCP2MX = 1 (default) – ECCP2 is multiplexed
to RC1
• If CCP2MX = 0 – ECCP2 is multiplexed to RE7
ECCP Mode
Timer Resource
Capture
Timer1 or Timer3
Compare
Timer1 or Timer3
PWM
Timer2, Timer4, Timer6, Timer8,
Timer10 or Timer12