Microchip Technology MCU PIC PIC18F87K22-I/PTRSL TQFP-80 MCP PIC18F87K22-I/PTRSL Data Sheet
Product codes
PIC18F87K22-I/PTRSL
PIC18F87K22 FAMILY
DS39960D-page 210
2009-2011 Microchip Technology Inc.
15.2
Timer2 Interrupt
Timer2 can also generate an optional device interrupt.
The Timer2 output signal (TMR2 to PR2 match) provides
the input for the 4-bit output counter/postscaler. This
counter generates the TMR2 match interrupt flag, which
is latched in TMR2IF (PIR1<1>). The interrupt is enabled
by setting the TMR2 Match Interrupt Enable bit, TMR2IE
(PIE1<1>).
A range of 16 postscaler options (from 1:1 through 1:16
inclusive) can be selected with the postscaler control
bits, T2OUTPS<3:0> (T2CON<6:3>).
The Timer2 output signal (TMR2 to PR2 match) provides
the input for the 4-bit output counter/postscaler. This
counter generates the TMR2 match interrupt flag, which
is latched in TMR2IF (PIR1<1>). The interrupt is enabled
by setting the TMR2 Match Interrupt Enable bit, TMR2IE
(PIE1<1>).
A range of 16 postscaler options (from 1:1 through 1:16
inclusive) can be selected with the postscaler control
bits, T2OUTPS<3:0> (T2CON<6:3>).
15.3
Timer2 Output
The unscaled output of TMR2 is available primarily to
the ECCP modules, where it is used as a time base for
operations in PWM mode.
Timer2 can optionally be used as the shift clock source
for the MSSP modules operating in SPI mode.
Additional information is provided in
the ECCP modules, where it is used as a time base for
operations in PWM mode.
Timer2 can optionally be used as the shift clock source
for the MSSP modules operating in SPI mode.
Additional information is provided in
.
FIGURE 15-1:
TIMER2 BLOCK DIAGRAM
TABLE 15-1:
REGISTERS ASSOCIATED WITH TIMER2 AS A TIMER/COUNTER
Name
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
INTCON
GIE/GIEH PEIE/GIEL
TMR0IE
INT0IE
RBIE
TMR0IF
INT0IF
RBIF
PIR1
PSPIF
ADIF
RC1IF
TX1IF
SSP1IF
TMR1GIF
TMR2IF
TMR1IF
PIE1
PSPIE
ADIE
RC1IE
TX1IE
SSP1IE
TMR1GIE
TMR2IE
TMR1IE
IPR1
PSPIP
ADIP
RC1IP
TX1IP
SSP1IP
TMR1GIP
TMR2IP
TMR1IP
TMR2
Timer2 Register
T2CON
—
T2OUTPS3 T2OUTPS2 T2OUTPS1 T2OUTPS0
TMR2ON
T2CKPS1
T2CKPS0
PR2
Timer2 Period Register
PMD1
PSPMD
CTMUMD
RTCCMD
TMR4MD
TMR3MD
TMR2MD
TMR1MD
EMBDM
Legend:
— = unimplemented, read as ‘0’. Shaded cells are not used by the Timer2 module.
Comparator
TMR2 Output
TMR2
Postscaler
Prescaler
PR2
2
F
OSC
/4
1:1 to 1:16
1:1, 1:4, 1:16
4
T2OUTPS<3:0>
T2CKPS<1:0>
Set TMR2IF
Internal Data Bus
8
Reset
TMR2/PR2
8
8
(to PWM or MSSPx)
Match