Texas Instruments TMDSEMU560V2STM-U - Blackhawk XDS560v2 System Trace USB Emulator TMDSEMU560V2STM-U TMDSEMU560V2STM-U Data Sheet
Product codes
TMDSEMU560V2STM-U
XDS560 Features
1-2
1.1
XDS560 Features
This technical reference describes the fundamentals of XDS560 PCI Emulator
and Pod and how to interface it to a target system.
and Pod and how to interface it to a target system.
The XDS560 emulator target interface and connector are designed to be back-
wards compatible with the XDS510 emulator using either the 3/5V or 1.8/5V
pod.
wards compatible with the XDS510 emulator using either the 3/5V or 1.8/5V
pod.
Features of the XDS560:
-
PCI-bus based emulator board
-
Support for HS-RTDX enabled devices
-
Wide dynamic operating voltage: 0.5 to 5.0 volts
-
Programmable TCK: 500KHz to 35MHz
-
Overall cable/pod length of 6ft (1.5m) with the pod dimensions of 1.5” x 3”
x 0.4” (38mm x 75mm x 10mm)
x 0.4” (38mm x 75mm x 10mm)
-
All output target signals are Hi-Z
t
when connected or powered-on
-
All pod signals are ESD protected
-
Hardware detection of power losses and cable disconnects
Texas Instrument’s emulation logic and emulation tools are specifically de-
signed to work together complimenting TI’s Digital Signal Processors.
signed to work together complimenting TI’s Digital Signal Processors.
A fundamental understanding of emulation will accelerate your set up, devel-
opment and software debug. This knowledge will also aid in troubleshooting
potential problems in your debugging setup
opment and software debug. This knowledge will also aid in troubleshooting
potential problems in your debugging setup