Texas Instruments TMDSEMU560V2STM-U - Blackhawk XDS560v2 System Trace USB Emulator TMDSEMU560V2STM-U TMDSEMU560V2STM-U 데이터 시트

1-2

This technical reference describes the fundamentals of XDS560 PCI Emulator
and Pod and how to interface it to a target system.

The XDS560 emulator target interface and connector are designed to be back-
wards compatible with the XDS510 emulator using either the 3/5V or 1.8/5V
pod.

Features of the XDS560:

-

PCI-bus based emulator board

-

Support for HS-RTDX enabled devices

-

Wide dynamic operating voltage: 0.5 to 5.0 volts

-

Programmable TCK: 500KHz to 35MHz

-

Overall cable/pod length of 6ft (1.5m) with the pod dimensions of 1.5” x 3”
x 0.4” (38mm x 75mm x 10mm)

-

All output target signals are Hi-Z

t

 when connected or powered-on

-

All pod signals are ESD protected

-

Hardware detection of power losses and cable disconnects

Texas Instrument’s emulation logic and emulation tools are specifically de-
signed to work together complimenting TI’s Digital Signal Processors.

A fundamental understanding of emulation will accelerate your set up, devel-
opment and software debug. This knowledge will also aid in troubleshooting
potential problems in your debugging setup