Microchip Technology MA330019-2 Data Sheet
© 2007-2012 Microchip Technology Inc.
DS70292G-page 283
dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04, AND dsPIC33FJ128GPX02/X04
23.0 COMPARATOR MODULE
The Comparator module provides a set of dual input
comparators. The inputs to the comparator can be con-
figured to use any one of the four pin inputs (C1IN+,
C1IN-, C2IN+ and C2IN-) as well as the Comparator
Voltage Reference Input (CV
comparators. The inputs to the comparator can be con-
figured to use any one of the four pin inputs (C1IN+,
C1IN-, C2IN+ and C2IN-) as well as the Comparator
Voltage Reference Input (CV
REF
).
FIGURE 23-1:
COMPARATOR I/O OPERATING MODES
Note 1: This data sheet summarizes the features
of the dsPIC33FJ32GP302/304,
dsPIC33FJ64GPX02/X04, and
dsPIC33FJ128GPX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to Section 34.
“Comparator” (DS70212) of the
“dsPIC33F/PIC24H Family Reference
Manual”, which is available from the
Microchip website (
dsPIC33FJ64GPX02/X04, and
dsPIC33FJ128GPX02/X04 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to Section 34.
“Comparator” (DS70212) of the
“dsPIC33F/PIC24H Family Reference
Manual”, which is available from the
Microchip website (
www.microchip.com
).
2: Some registers and associated bits
described in this section may not be avail-
able on all devices. Refer to
able on all devices. Refer to
in this data
sheet for device-specific register and bit
information.
information.
Note:
This peripheral contains output func-
tions that may need to be configured by
the peripheral pin select feature. For
more information, see
tions that may need to be configured by
the peripheral pin select feature. For
more information, see
C2
C2IN-
V
IN
-
V
IN
+
C2IN+
CV
REF
C2IN+
C2OUT
(1)
C2OUT (CMCON<7>)
C1
C1IN-
V
IN
-
V
IN
+
C1IN+
CV
REF
C1IN+
C1OUT
(1)
C1OUT (CMCON<6>)
C1NEG
C1POS
C2NEG
C2POS
C1INV
C2INV
C1OUTEN
C2OUTEN
C1EN
C2EN
Note 1: This peripheral’s outputs must be assigned to an available RPn pin before use. Refer to