Microchip Technology MA330025-1 Data Sheet
© 2011 Microchip Technology Inc.
DS51886B-page 1
dsPIC33EP512MU810 and
PIC24EP512GU810
OVERVIEW
The dsPIC33EP512MU810 and PIC24EP512GU810
PlMs (MA330025-1 and MA240025-1, respectively)
are designed to demonstrate the capabilities of the
dsPIC33EP512MU810 and PIC24EP512GU810
devices. The dsPIC33EP512MU810 is a high-
performance 16-bit Digital Signal Controller (DSC) and
the PIC24EP512GU810 is a high-performance 16-bit
Microcontroller (MCU). Both devices include a USB 2.0
OTG interface. Refer to
PlMs (MA330025-1 and MA240025-1, respectively)
are designed to demonstrate the capabilities of the
dsPIC33EP512MU810 and PIC24EP512GU810
devices. The dsPIC33EP512MU810 is a high-
performance 16-bit Digital Signal Controller (DSC) and
the PIC24EP512GU810 is a high-performance 16-bit
Microcontroller (MCU). Both devices include a USB 2.0
OTG interface. Refer to
for the device
schematics and
schematics.
These PIMs can be used for USB as well as non-USB
applications by configuring jumpers on the PIM PC
board. This routing is intended to maximize the
compatibility of the PIM with the Explorer 16
Development Board (DM240001) and its related
PICtail™ Plus daughter boards. For non-USB
applications, jumpers J1 through J5 must be populated
applications by configuring jumpers on the PIM PC
board. This routing is intended to maximize the
compatibility of the PIM with the Explorer 16
Development Board (DM240001) and its related
PICtail™ Plus daughter boards. For non-USB
applications, jumpers J1 through J5 must be populated
across positions 1 and 2, while jumpers J6 through J10
should be populated. For USB applications, jumpers J1
through J5 must be populated across positions 2 and 3,
while jumpers J6 through J10 should not be populated.
should be populated. For USB applications, jumpers J1
through J5 must be populated across positions 2 and 3,
while jumpers J6 through J10 should not be populated.
shows the jumper locations.
shows the mapping between the 100-pin PIM
interface board and the device pins when the jumpers
on the PIM are configured for USB applications.
on the PIM are configured for USB applications.
shows the mapping between the 100-pin PIM
interface board and the device pins when the jumpers
on the PIM are configured for non-USB applications.
on the PIM are configured for non-USB applications.
In addition, the dsPIC33EP512MU810 PIM can be
used to control the Microchip MCLV (DM330021),
MCHV (DM330023) and MCSM (DM330022) motor
control development boards. The Microchip application
note AN1208 “Integrated Power Factor Correction
(PFC) and Sensorless Field Oriented Control (FOC)
System” (DS01208) requires that an optional zero Ohm
resistor to be installed at location R1.
used to control the Microchip MCLV (DM330021),
MCHV (DM330023) and MCSM (DM330022) motor
control development boards. The Microchip application
note AN1208 “Integrated Power Factor Correction
(PFC) and Sensorless Field Oriented Control (FOC)
System” (DS01208) requires that an optional zero Ohm
resistor to be installed at location R1.
TABLE 1:
100-PIN TQFP TO 100-PIN PIM FOR USB APPLICATIONS
Device
Pin #
dsPIC33EP512MU810 and
PIC24EP512GU810
Functional Description
PIM
Pin #
Device
Pin #
dsPIC33EP512MU810 and
PIC24EP512GU810
Functional Description
PIM
Pin #
1
RP127/RG15
—
19
AN21/RP89/RE9
19
2
V
DD
2
20
AN5/C1INA/VBUSON/VBUSST/RP37/RB5
96
3
AN29/PWM3H/PMD5/RP85/RE5
3
21
AN4/C1INB/USBOEN/RP36/RB4
21
4
AN30/PWM4L/PMD6/RP86/RE6
4
22
AN3/C2INA/VPIO/RP35/RB3
22
5
AN31/PWM4H/PMD7/RP87/RE7
5
23
AN2/C2INB/VMIO/RP34/RB2
23
6
AN16/PWM5L/RP49/RC1
6
24
PGEC3/AN1/RP33/RB1
24
7
AN17/PWM5H/RP50/RC2
7
25
PGED3/AN0/RP32/RB0
25
8
AN18/PWM6L/RP51/RC3
8
26
PGEC1/AN6/RP38/RB6
26
9
AN19/PWM6H/RP52/RC4
9
27
PGED1/AN7/RCV/RP39/RB7
27
10
C1IND/SCK2/PMA5/RP118/RG6
10
28
V
REF
-/RA9
28
11
C1INC/SDI2/PMA4/RP119/RG7
11
29
V
REF
+/RA10
29
12
C2IND/SDO2/PMA3/RP120/RG8
12
30
AV
DD
30
13
MCLR
13
31
AV
SS
31
14
C2INC/PMA2/RP121/RG9
14
32
AN8/PMA6/RP40/RB8
32
15
V
SS
15
33
AN9/PMA7//RP41/RB9
33
16
V
DD
16
34
AN10/CVREF/PMA13/RP42/RB10
34
17
TMS/RP16/RA0
17
35
AN11/PMA12/RP43/RB11
35
18
AN20/RP88/RE8
18
36
V
SS
36
37
V
DD
37
69
ASDA1/DPLN/RP73/RD9
69
dsPIC33EP512MU810 and PIC24EP512GU810
100-pin TQFP to 100-pin Plug-In Module (PIM)
Information Sheet