Microchip Technology ADM00352 User Manual
MCP16301 600 mA DEMO BOARD
USER’S GUIDE
2011 Microchip Technology Inc.
DS51978A-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MCP16301 600 mA Demo Board. Items discussed in this chapter include:
MCP16301 600 mA Demo Board. Items discussed in this chapter include:
DOCUMENT LAYOUT
This document describes how to use the MCP16301 600 mA Demo Board as a devel-
opment tool to emulate and debug firmware on a target board. The manual layout is as
follows:
opment tool to emulate and debug firmware on a target board. The manual layout is as
follows:
• Chapter 1. “Product Overview” – Important information about the MCP16301
600 mA Demo Board.
• Chapter 2. “Installation and Operation” – Includes instructions on how to get
started with MCP16301 600 mA Demo Board and a description of the user’s
guide.
guide.
• Appendix A. “Schematic and Layouts” – Shows the schematic and layout
diagrams for the MCP16301 600 mA Demo Board.
• Appendix B. “Bill of Materials” – Lists the parts used to build the MCP16301
600 mA Demo Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.