Microchip Technology TDGL019 Data Sheet
© 2011-2014 Microchip Technology Inc.
DS60001168F-page 215
PIC32MX1XX/2XX
23.0
COMPARATOR VOLTAGE
REFERENCE (CV
REFERENCE (CV
REF
)
The CV
REF
module is a 16-tap, resistor ladder network
that provides a selectable reference voltage. Although
its primary purpose is to provide a reference for the
analog comparators, it also may be used independently
of them.
The resistor ladder is segmented to provide two ranges
of voltage reference values and has a power-down
function to conserve power when the reference is not
being used. The module’s supply reference can be pro-
vided from either device V
its primary purpose is to provide a reference for the
analog comparators, it also may be used independently
of them.
The resistor ladder is segmented to provide two ranges
of voltage reference values and has a power-down
function to conserve power when the reference is not
being used. The module’s supply reference can be pro-
vided from either device V
DD
/V
SS
or an external
voltage reference. The CV
REF
output is available for
the comparators and typically available for pin output.
The comparator voltage reference has the following
features:
• High and low range selection
• Sixteen output levels available for each range
• Internally connected to comparators to conserve
The comparator voltage reference has the following
features:
• High and low range selection
• Sixteen output levels available for each range
• Internally connected to comparators to conserve
device pins
FIGURE 23-1:
COMPARATOR VOLTAGE REFERENCE BLOCK DIAGRAM
Note 1:
This data sheet summarizes the
features of the PIC32MX1XX/2XX
family of devices. It is not intended to
be a comprehensive reference source.
To complement the information in this
data sheet, refer to Section 20.
“Comparator Voltage Reference
(CV
features of the PIC32MX1XX/2XX
family of devices. It is not intended to
be a comprehensive reference source.
To complement the information in this
data sheet, refer to Section 20.
“Comparator Voltage Reference
(CV
REF
)”
(DS60001109) in the “PIC32
Family Reference Manual”
, which is
available from the Microchip web site
(
(
2:
Some registers and associated bits
described in this section may not be
available on all devices. Refer to
described in this section may not be
available on all devices. Refer to
in
this data sheet for device-specific
register and bit information.
register and bit information.
16-
to-1 MU
X
CVR<3:0>
8R
R
CVREN
CVRSS = 0
AV
DD
V
REF
+
CVRSS = 1
8R
CVRSS = 0
V
REF
-
CVRSS = 1
R
R
R
R
R
R
16 Steps
CVRR
CV
REFOUT
AV
SS
CVRCON<CVROE>
CV
REF
CV
RSRC