Microchip Technology TDGL019 Data Sheet

© 2011-2014 Microchip Technology Inc.

DS60001168F-page 249

Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature

-40°C 

≤ T

A

 

≤ +85°C for Industrial 

-40°C 

≤ T

A

 

≤ +105°C for V-temp 

DC30a

1

1.5

mA

4 MHz (Note 3)

DC31a

2

3

mA

10 MHz

DC32a

4

6

mA

20 MHz (Note 3)

DC33a

5.5

8

mA

30 MHz (Note 3)

DC34a

7.5

11

mA

40 MHz

DC37a

100

—

µA

-40°C

3.3V

LPRC (31 kHz) 

DC37b

250

—

µA

+25°C

DC37c

380

—

µA

+85°C

The test conditions for I

IDLE

 current measurements are as follows:

• Oscillator mode is EC (for 8 MHz and below) and EC+PLL (for above 8 MHz) with OSC1 driven by 

external square wave from rail-to-rail, (OSC1 input clock input over/undershoot < 100 mV required)

• OSC2/CLKO is configured as an I/O input pin
• USB PLL oscillator is disabled if the USB module is implemented, PBCLK divisor = 1:8
• CPU is in Idle mode (CPU core Halted), and SRAM data memory Wait states = 1
• No peripheral modules are operating, (ON bit = 0), but the associated PMD bit is cleared
• WDT, Clock Switching, Fail-Safe Clock Monitor, and Secondary Oscillator are disabled
• All I/O pins are configured as inputs and pulled to V

SS

• MCLR = V

DD

• RTCC and JTAG are disabled

Data in the “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance 
only and are not tested.

This parameter is characterized, but not tested in manufacturing.

I

IDLE

 electrical characteristics for devices with 256 KB Flash are only provided as Preliminary information.