Microchip Technology DM164134 Data Sheet

© 2006 Microchip Technology Inc.

DS41159E-page 1

• Linear program memory addressing up to 

2 Mbytes

• Linear data memory addressing to 4 Kbytes

• Up to 10 MIPS operation

• DC – 40 MHz clock input

• 4 MHz-10 MHz oscillator/clock input with 

PLL active

• 16-bit wide instructions, 8-bit wide data path

• Priority levels for interrupts

• 8 x 8 Single-Cycle Hardware Multiplier

• High current sink/source 25 mA/25 mA

• Three external interrupt pins

• Timer0 module: 8-bit/16-bit timer/counter with 

8-bit programmable prescaler

• Timer1 module: 16-bit timer/counter

• Timer2 module: 8-bit timer/counter with 8-bit 

period register (time base for PWM)

• Timer3 module: 16-bit timer/counter

• Secondary oscillator clock option – Timer1/Timer3

• Capture/Compare/PWM (CCP) modules; 

CCP pins can be configured as:

- Capture input: 16-bit, max resolution 6.25 ns 

- Compare: 16-bit, max resolution 100 ns (T

CY

)

- PWM output: PWM resolution is 1 to 10-bit

Max. PWM freq. @:8-bit resolution = 156 kHz

10-bit resolution = 39 kHz

• Enhanced CCP module which has all the features 

of the standard CCP module, but also has the 
following features for advanced motor control:

- 1, 2 or 4 PWM outputs

- Selectable PWM polarity

- Programmable PWM dead time

• Master Synchronous Serial Port (MSSP) with two 

modes of operation:

- 3-wire SPI™ (Supports all 4 SPI modes)

- I

2

C™ Master and Slave mode

• Addressable USART module: 

- Supports interrupt-on-address bit 

• 10-bit, up to 8-channel Analog-to-Digital Converter

module (A/D) with:

- Conversion available during Sleep

- Up to 8 channels available

• Analog Comparator module:

- Programmable input and output multiplexing

• Comparator Voltage Reference module

• Programmable Low-Voltage Detection (LVD) module:

- Supports interrupt-on-Low-Voltage Detection

• Programmable Brown-out Reset (BOR)

• Complies with ISO CAN Conformance Test

• Message bit rates up to 1 Mbps

• Conforms to CAN 2.0B Active Spec with:

- 29-bit Identifier Fields

- 8-byte message length

- 3 Transmit Message Buffers with prioritization

- 2 Receive Message Buffers

- 6 full, 29-bit Acceptance Filters

- Prioritization of Acceptance Filters

- Multiple Receive Buffers for High Priority 

Messages to prevent loss due to overflow

- Advanced Error Management Features

• Power-on Reset (POR), Power-up Timer (PWRT) 

and Oscillator Start-up Timer (OST)

• Watchdog Timer (WDT) with its own on-chip RC 

oscillator

• Programmable code protection

• Power-saving Sleep mode

• Selectable oscillator options, including: 

- 4x Phase Lock Loop (PLL) of primary oscillator

- Secondary Oscillator (32 kHz) clock input

• In-Circuit Serial Programming

TM

 (ICSP

TM

) via two pins

• Low-power, high-speed Enhanced Flash technology

• Fully static design

• Wide operating voltage range (2.0V to 5.5V)

• Industrial and Extended temperature ranges