Voltcraft CPPS-160-42, 1 Output Variable DC Power Supply, , Bench CPPS-160-42 User Manual
Product codes
CPPS-160-42
50
10. "PRESET" MEMORY LOCATION OPERATION
Three fixed voltages including the current settings can be directly selected via the preset
function in the device. All three memory locations (PRESET 1, 2, 3) are preset by the factory.
Type
Memory
PRESET 1
PRESET 2
PRESET 3
Voltage
Current
Voltage
Current
Voltage
Current
CPPS-160-42
5 V
Maximum
13.8 V
Maximum
40 V
Maximum
CPPS-160-84
5 V
Maximum
13.8 V
Maximum
80 V
Maximum
Please ensure that no consumers are connected.
The data memory can be set via the software provided. Please also note the
chapter "Control with PC software".
1. Press any selection button PRESET 1, 2, 3 (8). The button lights up and the preset values
are indicated in the display (2).
2. You can change the preset voltage and current values according to your needs. The output
voltage can be changed at the VOLTAGE setting controller (4) and the output current at the
CURRENT (5) setting controller.
If you change the preset voltage and current values, these values are stored,
if the laboratory power supply is switched off. Always test the values set
before connecting a consumer.
3. Press the SHIFT (8) button and then any selection button PRESET 1, 2, 3 (8). To test the
preset values. The preset values are indicated in the display (2). The display switches back
to normal display after approximately 2 seconds.
Read the chapter "Resetting the values set" to reset the values set to the factory
settings.
1182100-1182103_v1_1114_02_m_(3).indb 50
5/11/14 18:24