Testo testo 870-2 , 9 Hz thermography camera, , 160 × 120 pix bolometer matrix 0560 8702 User Manual
Product codes
0560 8702
5 Performing the measurement
22
these sources be determined and used. The reflected temperature has little
effect on objects with high emissivity.
effect on objects with high emissivity.
@
Further information can be found in the Pocket Guide.
1
- Select
Emissivity
function. For how to proceed: see Getting to
know the menu, page 11.
2
- Move the
Joystick
up/down to select the required material (with
permanently set emissivity) and then press
OK
.
2.1
- Move the
Joystick
up/down until
User defined
is selected.
- Move the
Joystick
to the right until
E
is selected.
- Manually set value.
3
- Move the
Joystick
to the right until
RTC
is selected.
- Manually set value.
4
- Press
OK
.
5.7
Selecting the colour palette
testo 870-2: this function is only available if the
Image type
is set to infrared
image.
1
- Select
Palette
function. For how to proceed: see Getting to know the
2
- Move the
Joystick
up/down to select the required colour palette and
then press
OK
.
@
For further setting options, see Colour palette quick change, page 12.