Thecus N3200 Leaflet

RAID Setup and Firmware Installation

Once the setup wizard has completed, you should now be inside the Web Admin
Interface. From here, it is time to initialize your RAID system and install the

firmware for the N3200.

NOTE

The next steps are for first time setup only. If you have previously setup your

N3200, you can skip this section of the setup process.

Setting up the RAID

1. From the Web Admin Interface, navigate to Storage > RAID. The RAID

Information screen appears.

Click

Config.

2. Select your desired RAID level, and check the checkboxes of the disks you

wish to use in your array.

3. Select a stripe size – the default is 64K.

4. Click Create to create your selected RAID volume.