Thecus N3200 Leaflet

The N3200 is equipped with an LCD on the front for easy status display and setup. 
There are four buttons on the front panel to control the LCD functions. 

Use the Down (

▼

), Up (

▲

), Enter (

↵

) and Escape (ESC) keys to select various 

configuration settings and menu options for N3200 configuration. 

 

 
The following table illustrates the keys on the front control panel: 
 

▼

 

Down Button 

Select the previous configuration settings option. 

▲

 

Up Button 

Select the next configuration settings option. 

↵ 

Enter 

Enter the selected menu option, sub-menu, or parameter setting. 

Escape 

Escape and return to the previous menu. 

Press and hold for 3 seconds to turn off the LCD’s backlight. 

Press any button to switch the backlight back on. 
If a buzzer alarm is triggered, press this to stop the buzzer. 

During normal operation, the LCD will be in Display Mode. 

 

Item Description 
Host Name 

Current host name of the system. 

WAN 

Current WAN IP setting.  

LAN 

Current LAN IP setting. 

RAID 

Current RAID status. 

USB Current 

USB 

status. 

System Fan 

Current system fan status. 

Temperature 

Current system temperature. 

 
The N3200 will rotate these messages every three seconds on the LCD display. 

If the RAID array is in a degraded state, the LCD display will be stopped in display 
mode and show which disk is degraded in the array: 

 

RAID: Degraded [Disk #] 

The USB Copy function enables you to copy files stored on USB devices such as 

USB disks and digital cameras to the N3200 with a press of a button. To use USB 
copy, follow the steps below: 

 

1.  Plug your USB device into an available USB port on the Front Panel. 

 
2.  In Display Mode, press the UP Button (

▲

). 

 

3.  The LCD will display “USB Copy?”  

 

4.  Press Enter (

↵

) and the N3200 will start copying USB disks connected to 

the front USB port. The LCD will display the USB copy progress and results. 

 

 

 
 

19