Thecus N3200 Leaflet

Use the Network menu to make network configuration settings as well as service 
support settings. 

From the Network menu, choose WAN, 
and the WAN Configuration screen 
appears. This screen displays the network 

parameters of the WAN connection. You 
may change any of these items and press 

Apply to confirm your settings. See a 
description of each item in the following 

table: 

 

 
 
 

 
 

 

Item Description 
Host name 

Host name that identifies the N3200 on the network. 

Domain name 

Specifies the domain name of the N3200. 

MAC Address 

MAC address of the network interface. 

Jumbo Frame Support 

Enable or disable Jumbo Frame Support of the WAN interface on 

your N3200. 

WAN Port 

Enable or disable the N3200 from obtaining in IP address via 

DHCP server. If you require a static IP, disable this feature and 

input your network configuration. 

IP 

IP address of the WAN interface. 
Network mask, which is generally: 255.255.255.0 

Netmask 
Gateway 

Default Gateway IP address. 

DNS Server 

Domain Name Service (DNS) server IP address. 

IP Sharing Mode 

When enabled, PCs connected to the LAN port will be able to 

access the WAN. Default is Enabled. 

 
 

•  Only use Jumbo Frame settings when operating in a Gigabit environment where 

all other clients have Jumbo Frame Setting enabled. 

•  Enabling DHCP automatically turns on UPnP—see the Service Support Screen. 

•  If you are only using the WAN port, we suggest that you disable IP Sharing 

Mode. This will result in higher throughput. 

•  A correct DNS setting is vital to networks services, such as SMTP and NTP. 

•  To use the Link Aggregation feature, please make sure the networking 

equipment on the other end of Ethernet cable also supports 802.3ad protocol. 

 

 
 

 
 

 

Most Fast Ethernet (10/100) Switches/Routers do not support Jumbo Frame and 

you will not be able to connect to your N3200 after Jumbo Frame is turned on. If 
this happens, turn off the N3200. Then, power on the N3200 and immediately press 

and hold the Reset button on the back of the unit for 10 seconds. This will reset 

your network settings, password, and turn off Jumbo Frame Support. 

 

 
 
 

 

 
 

33