Fluke 190-104/EU 4-channel hand-held oscilloscope, ScopeMeter® 190 series II, hand-held 3894540 User Manual
Product codes
3894540
Fluke 190-104, Fluke 190-204
Users Manual
Users Manual
56
Automatic Trigger Options
In the trigger menu, settings for automatic triggering can
be changed as follows. (See also Chapter 1: “Displaying
an Unknown Signal with Connect-and-View”)
be changed as follows. (See also Chapter 1: “Displaying
an Unknown Signal with Connect-and-View”)
1
TRIGGER
Display the
TRIGGER
key labels.
Note
The
TRIGGER
key labels can differ depending on
the latest trigger function used.
2
F4
Open the
TRIGGER OPTIONS
menu.
3
ENTER
Open the
AUTOMATIC TRIGGER
menu.
If the frequency range of the automatic triggering is set to
> 15 Hz, the Connect-and-View™ function responds more
quickly. The response is quicker because the test tool is
instructed not to analyze low frequency signal
components. However, when you measure frequencies
lower than 15 Hz, the test tool must be instructed to
analyze low frequency components for automatic
triggering:
> 15 Hz, the Connect-and-View™ function responds more
quickly. The response is quicker because the test tool is
instructed not to analyze low frequency signal
components. However, when you measure frequencies
lower than 15 Hz, the test tool must be instructed to
analyze low frequency components for automatic
triggering:
4
ENTER
Select >
1
H
Z
and return to the
measurement screen.