Fluke Fluke-709 Calibrator, 4234350 Data Sheet
Product codes
4234350
709/709H
Users Manual
Users Manual
20
HART 250
Ω
Resistor
The HART 250
Ω
Resistor Enable function turns on and
turns off the HART resistor. See the “HART Resistor”
section of this manual. See Figure 14.
section of this manual. See Figure 14.
gzx26.eps
Figure 14. HART Resistor Enable Screen
The Product can insert a 250 Ω resistor in series with the
power supply in order to use a HART communicator. The
HART resistor is enabled through the menu.
power supply in order to use a HART communicator. The
HART resistor is enabled through the menu.
To get to the second Calibrator Setup Screen, highlight
Other Parameters and push the selection knob.
Other Parameters and push the selection knob.
mA Span
mA Span is the first item on the second Calibrator Setup
Menu.
Menu.
The mA Span function sets the step interval for the mA
Auto Step feature. The value can be set from 5 seconds
to 300 seconds. See the “Step and Ramp Operation”
section of this manual. See Figure 15.
Auto Step feature. The value can be set from 5 seconds
to 300 seconds. See the “Step and Ramp Operation”
section of this manual. See Figure 15.
gzx27.eps
Figure 15. mA Span Selection Screen