Fluke Fluke-709 Calibrator, 4234350 Data Sheet
Product codes
4234350
Precision Loop Calibrator
Device Diagnostic
39
Device Diagnostic
Note
For the screens in this section, tag names can
be truncated to fit on one line if necessary.
flashes in the upper-right corner to show a live
connection.
be truncated to fit on one line if necessary.
flashes in the upper-right corner to show a live
connection.
If the HART write commands are not active, this function
is not available and an error message is shown.
is not available and an error message is shown.
A warning to change the loop to MANUAL before you
proceed is shown. Push the selection knob to proceed.
Push to go to the Function Select menu.
proceed is shown. Push the selection knob to proceed.
Push to go to the Function Select menu.
Push the selection knob to select and start the self test.
See Figure 40.
See Figure 40.
gzx49.eps
Figure 40. Self Test Screen
As the self test is done, the bottom line of the screen
changes to Testing and a string of dots extends once per
second to show the operation progress.
changes to Testing and a string of dots extends once per
second to show the operation progress.
At the end of the self test, the screen in Figure 41 is
shown. It shows No errors or the first error is reported.
shown. It shows No errors or the first error is reported.
gzx50.eps
Figure 41. Self Test Results Screen
The lower-left corner shows when additional errors
follow the present error. is shown when additional
errors precede the present error. and show when
additional errors follow and precede the present error.
follow the present error. is shown when additional
errors precede the present error. and show when
additional errors follow and precede the present error.