Bosch AKE 35 0 600 834 001 Data Sheet
Product codes
0 600 834 001
English - 9
The following table gives checks and actions that you can perform if your machine does not operate correctly.
If these do not identify/remedy the problem, contact your service agent.
If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove plug from mains before investigating fault.
Power tools, accessories and packaging should be
sorted for environmental-friendly recycling.
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Directive
2002/96/EC on waste electrical and
electronic equipment and its incorpo-
ration into national law, products that
household waste!
According to the European Directive
2002/96/EC on waste electrical and
electronic equipment and its incorpo-
ration into national law, products that
are no longer suitable for use must be separately
collected and sent for recovery in an environmen-
tally-friendly manner.
collected and sent for recovery in an environmen-
tally-friendly manner.
Our after-sales service responds to your questions
concerning maintenance and repair of your product
as well as spare parts. Exploded views and informa-
tion on spare parts can also be found under:
www.bosch-pt.com
Our customer consultants answer your questions
concerning best buy, application and adjustment of
products and accessories.
concerning maintenance and repair of your product
as well as spare parts. Exploded views and informa-
tion on spare parts can also be found under:
www.bosch-pt.com
Our customer consultants answer your questions
concerning best buy, application and adjustment of
products and accessories.
Fault Finding
Symptom
Possible Cause
Remedy
Chain saw fails to
operate
operate
Kickback brake is activated
No power
Mains socket faulty
Extension cord damaged
Fuse faulty
Mains socket faulty
Extension cord damaged
Fuse faulty
Pull hand guard 5 back in position
➊
(Figure D)
Check power
Use another socket
Check cord, replace
Replace fuse
Check power
Use another socket
Check cord, replace
Replace fuse
Chain saw operates
intermittently
intermittently
Extension cord damaged
Loose connection
Internal wiring defective
On/Off switch defective
Loose connection
Internal wiring defective
On/Off switch defective
Check cord, replace
Contact service agent
Contact service agent
Contact service agent
Contact service agent
Contact service agent
Contact service agent
Dry chain
No oil in reservoir
Vent in oil filler cap clogged
Oil passage clogged
Vent in oil filler cap clogged
Oil passage clogged
Refill oil
Clean cap
Clean oil passage outlet
Clean cap
Clean oil passage outlet
Kickback Brake/
Run Down Brake
Run Down Brake
Brake does not stop chain
Contact service agent
Chain/chain bar
overheats
overheats
No oil in reservoir
Vent in oil filler cap clogged
Oil passage clogged
Chain is over tensioned
Dull chain
Vent in oil filler cap clogged
Oil passage clogged
Chain is over tensioned
Dull chain
Refill oil
Clean cap
Clean oil passage outlet
Adjust chain tension
Sharpen chain or replace
Clean cap
Clean oil passage outlet
Adjust chain tension
Sharpen chain or replace
Chain saw rips,
vibrates, does not
saw properly
vibrates, does not
saw properly
Chain tension too loose
Dull chain
Chain worn out
Chain teeth are facing in the wrong direction
Dull chain
Chain worn out
Chain teeth are facing in the wrong direction
Adjust chain tension
Sharpen chain or replace
Replace chain
Reassemble with chain in correct direction
Sharpen chain or replace
Replace chain
Reassemble with chain in correct direction
Disposal
After-Sales Service and
Customer Assistance
Customer Assistance
F 016 L70 721 - Buch Seite 9 Donnerstag, 11. Februar 2010 3:37 15
25 • F 016 L70 721 • 10.02