Atmel Xplained Pro Evaluation Kit for the ATSAMD21J18A Microcontroller ATSAMD21-XPRO ATSAMD21-XPRO Data Sheet
Product codes
ATSAMD21-XPRO
775
Atmel | SMART SAM D21 [DATASHEET]
Atmel-42181C–SAM-D21_Datasheet–07/2014
1: The End Of Resume interrupt is enabled.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the End Of Resume interrupt Enable bit and enable the corresponding interrupt
request.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the End Of Resume interrupt Enable bit and enable the corresponding interrupt
request.
z
Bit 4 – WAKEUP: Wake-Up Interrupt Enable
0: The Wake Up interrupt is disabled.
1: The Wake Up interrupt is enabled.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the Wake Up interrupt Enable bit and enable the corresponding interrupt request.
0: The Wake Up interrupt is disabled.
1: The Wake Up interrupt is enabled.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the Wake Up interrupt Enable bit and enable the corresponding interrupt request.
z
Bit 3 – EORST: End of Reset Interrupt Enable
0: The End of Reset interrupt is disabled.
1: The End of Reset interrupt is enabled.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the End of Reset interrupt Enable bit and enable the corresponding interrupt
request.
0: The End of Reset interrupt is disabled.
1: The End of Reset interrupt is enabled.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the End of Reset interrupt Enable bit and enable the corresponding interrupt
request.
z
Bit 2 – SOF: Start-of-Frame Interrupt Enable
0: The Start-of-Frame interrupt is disabled.
1: The Start-of-Frame interrupt is enabled.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the Start-of-Frame interrupt Enable bit and enable the corresponding interrupt
request.
0: The Start-of-Frame interrupt is disabled.
1: The Start-of-Frame interrupt is enabled.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the Start-of-Frame interrupt Enable bit and enable the corresponding interrupt
request.
z
Bit 1 – Reserved
This bit is unused and reserved for future use. For compatibility with future devices, always write this bit to zero
when this register is written. This bit will always return zero when read.
This bit is unused and reserved for future use. For compatibility with future devices, always write this bit to zero
when this register is written. This bit will always return zero when read.
z
Bit 0 – SUSPEND: Suspend Interrupt Enable
0: The Suspend interrupt is disabled.
1: The Suspend interrupt is enabled.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the Suspend interrupt Enable bit and enable the corresponding interrupt request.
0: The Suspend interrupt is disabled.
1: The Suspend interrupt is enabled.
Writing a zero to this bit has no effect.
Writing a one to this bit will set the Suspend interrupt Enable bit and enable the corresponding interrupt request.