Olimex Open Source Hardware MAPLE / ARDUINO like development board OLIMEXINO-STM32 OLIMEXINO-STM32 User Manual

16.

All signals on the connectors are printed on top and on bottom of the board, 

so when you check with probe you know exactly which port you are measuring.
17.

4 mount holes make board attachment easier

The OLIMEXINO-STM32 board is shipped in protective anti-static packaging. The 
board  must   not  be  subject   to  high  electrostatic  potentials.   General   practice   for 

working with static sensitive devices should be applied when working with this 
board.

You'll need mini USB cable for connecting the board to PC. For 

programming - the cable you will need depends on the programmer/debugger 

you use. If you use ARM-USB-TINY or ARM-USB-TINY-H, you will need USB A-B 
cable, if you use ARM-USB-OCD or ARM-USB-OCD-H, you will need USB A-B 

cable and RS232 cable.

Programmer/Debugger 

, 

 or other 

compatible programming/debugging tool if you work with EW-ARM. You will 
also need ARM-JTAG-20-10 adapter for programming the board since the JTAG 

connector is the small one (0.05'' step).

Page 4 of 19