Olimex Open Source Hardware MAPLE / ARDUINO like development board OLIMEXINO-STM32 OLIMEXINO-STM32 ユーザーズマニュアル
製品コード
OLIMEXINO-STM32
16.
All signals on the connectors are printed on top and on bottom of the board,
so when you check with probe you know exactly which port you are measuring.
17.
17.
4 mount holes make board attachment easier
ELECTROSTATIC WARNING:
The OLIMEXINO-STM32 board is shipped in protective anti-static packaging. The
board must not be subject to high electrostatic potentials. General practice for
board must not be subject to high electrostatic potentials. General practice for
working with static sensitive devices should be applied when working with this
board.
board.
BOARD USE REQUIREMENTS:
Cables:
You'll need mini USB cable for connecting the board to PC. For
programming - the cable you will need depends on the programmer/debugger
you use. If you use ARM-USB-TINY or ARM-USB-TINY-H, you will need USB A-B
cable, if you use ARM-USB-OCD or ARM-USB-OCD-H, you will need USB A-B
cable, if you use ARM-USB-OCD or ARM-USB-OCD-H, you will need USB A-B
cable and RS232 cable.
Hardware:
or other
compatible programming/debugging tool if you work with EW-ARM. You will
also need ARM-JTAG-20-10 adapter for programming the board since the JTAG
also need ARM-JTAG-20-10 adapter for programming the board since the JTAG
connector is the small one (0.05'' step).
Page 4 of 19