Carson Electr. single-rotor helicopter RtF (500507051) 500507051 Data Sheet
Product codes
500507051
29
CARSON Eurocopter EC145 DRF 50 050 7051
GB
4. Expert Mode reverse setup
Hold down the nick/roll stick for 1 second to enter the
setting status. Press the throttle trim key up or down to
choose reverse. And then hold down the nick/roll stick for
1 second to confirm and exit.
setting status. Press the throttle trim key up or down to
choose reverse. And then hold down the nick/roll stick for
1 second to confirm and exit.
1. Tail rotor (rudder) sensitivity setup NOR
(normal)
(normal)
mode
Hold down the nick/roll stick for 1 second to enter the setting status.
Press throttle/tail rotor key until the three-point dotted line symbol
starts to flash (see picture beside). Press rudder (tail rotor) trim to set
the sensitivity. And then hold down the nick/roll stick for 1 second to
confirm and exit.
Press throttle/tail rotor key until the three-point dotted line symbol
starts to flash (see picture beside). Press rudder (tail rotor) trim to set
the sensitivity. And then hold down the nick/roll stick for 1 second to
confirm and exit.
4. Tail rotor (rudder) sensitivity setup – Expert
mode
mode
Hold down the nick/roll stick for 1 second to enter the setting status.
Press the throttle/tail rotor key until the five-point dotted line symbol
starts to flash (see picture beside). Press tail rotor trim to set the
sensitivity and then hold down the nick/roll stick for 1 second to
confirm and exit.
Press the throttle/tail rotor key until the five-point dotted line symbol
starts to flash (see picture beside). Press tail rotor trim to set the
sensitivity and then hold down the nick/roll stick for 1 second to
confirm and exit.
2. Nick sensitivity setup – NOR (normal) mode
Hold down the nick/roll stick for 1 second to enter the setting status.
Press throttle/rudder (tail rotor) key until the three-point dotted line
symbol starts to flash (see picture beside). Press nick trim to set the
sensitivity. And then hold down the nick/roll stick for 1 second to
confirm and exit.
Press throttle/rudder (tail rotor) key until the three-point dotted line
symbol starts to flash (see picture beside). Press nick trim to set the
sensitivity. And then hold down the nick/roll stick for 1 second to
confirm and exit.
3. Aileron sensitivity setup – NOR (normal)
mode
mode
Hold down the nick/roll stick for 1 second to enter the setting status.
Press the throttle/tail rotor key until the three-point dotted line
symbol starts to flash (see picture beside). Press roll trim to set the
sensitivity. And then hold down the nick/roll stick for 1 second to
confirm and exit.
Press the throttle/tail rotor key until the three-point dotted line
symbol starts to flash (see picture beside). Press roll trim to set the
sensitivity. And then hold down the nick/roll stick for 1 second to
confirm and exit.
T
X
M1
M2
Expert
f. Sensitivity Setup
Flashing
Flashing
Flashing
Flashing