Carson Electr. single-rotor helicopter RtF (500507051) 500507051 数据表

Hold down the nick/roll stick for 1 second to enter the 
setting status. Press the throttle trim key up or down to 
choose reverse. And then hold down the nick/roll stick for 
1 second to confirm and exit.

Hold down the nick/roll stick for 1 second to enter the setting status. 
Press throttle/tail rotor key until the three-point dotted line symbol 
starts to flash (see picture beside). Press rudder (tail rotor) trim to set 
the sensitivity. And then hold down the nick/roll stick for 1 second to 
confirm and exit.

Hold down the nick/roll stick for 1 second to enter the setting status. 
Press the throttle/tail rotor key until the five-point dotted line symbol 
starts to flash (see picture beside). Press tail rotor trim to set the 
sensitivity and then hold down the nick/roll stick for 1 second to 
confirm and exit.

Hold down the nick/roll stick for 1 second to enter the setting status. 
Press throttle/rudder (tail rotor) key until the three-point dotted line 
symbol starts to flash (see picture beside). Press nick trim to set the 
sensitivity. And then hold down the nick/roll stick for 1 second to 
confirm and exit.

Hold down the nick/roll stick for 1 second to enter the setting status. 
Press the throttle/tail rotor key until the three-point dotted line 
symbol starts to flash (see picture beside). Press roll trim to set the 
sensitivity. And then hold down the nick/roll stick for 1 second to 
confirm and exit.