Thunder Tiger Brushless 1:8 RC model car Electric 6403-F113 User Manual

Product codes

6403-F113

BINDING PROCESS 安全校頻配對(鎖碼)

No Action
無須動作

A binding feature is included in the ACE RC Cougar 2.4GHz spread spectrum system to ensure the transmitter and receiver bind
properly and prevent interference from other controllers.
To manually bind Tx/Rx, please proceed as per the following steps:
a. Press and hold the “Binding” button on the upper side of the transmitter while turning on the transmitter.
b. Release the “Binding” button after the green LED flashes indicating the transmitter is binding.
c. Press and hold the bind button on the receiver while turning on the receiver. Binding process will then start automatically.The

LED will turn green/reed flash on the receiver.

d. Release the “Binding” button. Successful binding is confirmed by the binding LED changing from a quick blinking and then

remain solid on the transmitter. The LED will turn green on the receiver. Once binding is complete, the system will
automatically connect.

Note ! Binding process may take 2~4 seconds to execute. If binding fails, the LED on the receiver will turn red.
Please turn off the power and repeat the steps from a) ~d).

ACE RC Cougar GP3 採用最先進的專用3動2.4GHz無限展頻遙控系統。這個系統結合發射與接收可以互動溝通模式，跳動頻道
搜尋，使得整體無線遙控系統的傳輸展現準穩定的特性，同時也無須擔心頻率干擾的問題。如發現無法操控情形發生，需要重新

校頻配對，請依照下列步驟重新進行校頻配對程序：
a. 打開發射機電源時，同時持續按壓發射機之 "Binding" 按鈕。
b. 直按鈕旁之LED綠燈快速閃爍，再放開 "Binding" 按鈕，表示發射機正在進行自動搜尋校頻，此時請不要關閉發射機電源。
c. 然後按壓接收機上之 "Binding" 按鈕並同時開啟接收機電源，此時接收機將自動進行校頻配對程序。接收機LED燈號為紅綠快速

閃爍。

d. 放開 "Binding" ，一旦完成配對程序，發射機LED燈號會從綠色快速閃爍轉換成持續綠色燈號，接收機LED燈號將從紅色轉換為

綠色。此時表示接收機與發射機已完成配對溝通，可以進行操控。

注意！遙控系統校頻配對可能需要

2~4 秒執行程序。如果程序執行錯誤，發射及接收模組的 LED 燈號將持續呈現紅色。請

關閉電源再依

a)~d) 的順序重新操作配對程序。

TX Action

發射機動作

RX Action

接收機動作

LED
燈號

Step

步驟

RX LED：Green/red Flash
RX 燈號：綠/紅燈快速閃爍

TX LED:
Green Flash --> Green Solid
RX LED:
Red Solid --> Green Solid
TX 燈號：
綠燈快速閃爍

--> 綠燈亮

RX 燈號：
紅燈亮

--> 綠燈亮

TX LED：Green Flash
TX 燈號：綠燈快速閃爍

Swithch On 開 / Press 按

Release 放開

Press

按

Press

按