Uhlenbrock 65100 Intellibox II DCC System 65100 Data Sheet
![Uhlenbrock](https://files.manualsbrain.com/attachments/b98959370c0e0a60faf10158523778b2762d152a/common/fit/150/50/82a0e9f4c88f1cddd4704aa2938bbc062a5de9dbc15f58b94fe7875ac898/brand_logo.gif)
Product codes
65100
Intellibox II
10
Switching Special functions
• Press one of the Special function keys [f1] [f2] [f3] [f4]
• If you press the context sensitive key beside the display you operate functions f0 to f28
• Press one of the Special function keys [f1] [f2] [f3] [f4]
• If you press the context sensitive key beside the display you operate functions f0 to f28
on DCC decoders (see Chapter 5.4).
Note: All entries must be made on the controller on which the locomotive address or name
was originally entered!
was originally entered!
Changing the data for a single Locomotive
• Press the [lok]-key of the right or left controller twice
• With the Scroll key scroll down to the "Change Loco data entry" item
• Confirm the selection with the Select Key (Auswahltaste)
• Then make change to the desired setting for this locomotive address
Switching Turnouts
Turnouts are switched from the key block. With the eight pairs of keys the turnouts or
signals with addresses 1 to 8 can be switched. The respective position is indicated by a
turnout symbol in the middle part of the display. The allocation of the keyboard can be
easily changed at any time (see Chapter
• Press the [lok]-key of the right or left controller twice
• With the Scroll key scroll down to the "Change Loco data entry" item
• Confirm the selection with the Select Key (Auswahltaste)
• Then make change to the desired setting for this locomotive address
Switching Turnouts
Turnouts are switched from the key block. With the eight pairs of keys the turnouts or
signals with addresses 1 to 8 can be switched. The respective position is indicated by a
turnout symbol in the middle part of the display. The allocation of the keyboard can be
easily changed at any time (see Chapter
6.5).
1.3 Overview of the Commands
Very important!
Use this brief description only if you want a quick reference to a little
information. Please read the entire manual to be fully informed about all functions and
options of the device
options of the device
.
Switch off track power
• [stop]
Switch on track power
• [go]
Select Locomotive by Address
• [lok] + Address entry + [ ]
Select Locomotive by Name
• [lok] + Select key
Change Speed
• Turn the throttle knob
Change Direction
• With locomotive stationary press on the controller knob
Emergency stop of the controlled locomotive
• Press on the controller knob
Switch the Light function
• The [f0]-key switches the light on or off
Switch Special functions f1-f4
• [f1] [f2] [f3] [f4]
Switch Special functions f0-f28
• Press the context sensitive keys beside the display
• [stop]
Switch on track power
• [go]
Select Locomotive by Address
• [lok] + Address entry + [ ]
Select Locomotive by Name
• [lok] + Select key
Change Speed
• Turn the throttle knob
Change Direction
• With locomotive stationary press on the controller knob
Emergency stop of the controlled locomotive
• Press on the controller knob
Switch the Light function
• The [f0]-key switches the light on or off
Switch Special functions f1-f4
• [f1] [f2] [f3] [f4]
Switch Special functions f0-f28
• Press the context sensitive keys beside the display
Active functions are indicated with a tick.