Uhlenbrock 65100 Intellibox II DCC System 65100 Data Sheet

 

Selecting the Device Mode 
• Press [mode]-key 
•  Select with the keys on the right of the Display 
Change Control Panel Mode Key Assignment 
• Press [mode]-key 
•  Select panel with the keys on the right of the Display 
•  [menu] + Number 1 Key + [ ] (Factory setting 1) 
Change Feedback Mode Key Assignment 
• Press [mode]-key 
•  Select feedback with the keys on the right of the Display 
•  [menu] + Number 1 Key + [ ] (Factory setting 1) 
Configure the Data format individual Decoder 
•  [lok] + address entry + [ ] or [lok] + Select key 
•  Press [lok]-key x2 + with Scroll key scroll to "Change Loco Data" 
•  "Change Loco Data" + select "Change Data format" 
•  Select the desired Data format + "Save" 
Change Basic Setting 
• Press [mode]-key 
•  Select Basic Settings with the Select key on the left side of the display 
•  Confirm the setting with Select key 
•  Return control mode with [menu]-key 

•  Input power 
Maximum allowable of 18V AC 
•  Maximum Power loading 

3.5 A to the layout track  
0.5 A on LocoNet B output 
0.5 A on LocoNet T output 
All outputs have short circuit protection! 

•  Maximum number of Feedback modules 

A total of 2048 feedback contacts can be connected. 

•  Locomotive Address range 

DCC Data format: 1-9999, Motorola-Data format: 1-255 

•  Turnout Address range 

DCC Data format: 1-2048, Motorola Data format: 1-320 

•  Usable Transformer 

16-18V AC, 52-70VA, e.g. Uhlenbrock 70VA Transformer 20070 

•  Dimensions 

180 x 136 x 80 mm